# Fiber and MOPA Laser File Prep: Why Files That Cut Fine Mark Badly on Metal > New fiber and MOPA machines like the Creality Falcon T1 and xTool F Ultra series put metal marking on a lot of benches this year. Files that cut perfectly on a diode laser often mark badly on them, and it is almost never the settings — it is closed paths, path count, texture and units. Here is what to check before the beam touches metal. **Source:** https://vectosolve.com/blog/fiber-mopa-laser-file-preparation **Author:** Robin Monteiro (Founder and developer of VectoSolve) **Published:** 2026-08-17 **Category:** Guide **Reading time:** 8 **Tags:** fiber laser, MOPA, galvo, laser marking, DXF, file preparation, metal marking, LightBurn ---

Fiber and MOPA machines arrived on maker benches fast. The Creality Falcon T1 ships with swappable modules including a 20 W fiber and a 60 W MOPA, xTool's F1 Ultra and F2 Ultra cut and mark metal, and a lot of people who spent two years cutting plywood with a diode are now marking stainless for the first time.

The machine is the easy part. The surprise is that files that cut perfectly on a diode laser often mark badly on a fiber one, and the reason is almost never the settings. It is the geometry.

This is about file preparation only. Power, frequency and pulse duration depend on your machine and your metal, and anyone who gives you numbers without knowing both is guessing.

Marking is filling, and filling needs closed paths

A diode or CO2 laser cutting plywood follows an outline. It does not care whether the shape is closed, because it is tracing a line either way. An open path just cuts an open line.

Fiber marking is different. Most of what you do is fill — hatching, in your control software's language. The software floods the inside of a shape with closely spaced passes, and to know what "inside" means it needs the boundary to close. A path that is 0.02 mm from meeting itself looks closed on screen at 100% and is wide open to the fill algorithm.

The symptoms are recognisable once you know them:

All four are the same defect: the boundary is not closed, or the fill rule was lost in export. That last one is worth checking specifically. A vector file describes holes with a fill rule, and a converter that gets it wrong turns every counter into a filled blob. Zoom into an O, an A, an 8 before you send anything to metal.

Path count matters more on a galvo, not less

People assume galvo machines are so fast that path count stops mattering. The opposite is true for marking quality.

A gantry laser moving across plywood is slow enough that a few hundred extra paths cost you time and nothing else. A galvo head jumping between thousands of tiny fragments produces visible artefacts: uneven density where fills overlap, dwell marks at the start of each segment, and edges that look chewed under a light.

A sign maker gave us his working standard for a cut file this month: about 32 paths for a typical wordmark and emblem. It is a good target for marking too. When we first sent him one of our print-mode conversions of his own logo it carried more than three hundred paths, and he rejected it on sight. He was right.

Two checks, thirty seconds, before the file goes near metal:

  1. Select one letter and drag it. One click should grab one shape. If a letter breaks into a dozen slivers, the trace over-segmented and your fill will be uneven.
  2. Count the colours. Every distinct colour usually becomes a separate layer with its own settings. A logo that should be two colours arriving as fourteen means fourteen layers to configure, and near-identical shades that should have been merged.

Texture is the enemy, and metal is unforgiving about it

Distressed, weathered and grunge-textured logos are everywhere in workshop branding, and they are the single worst input for marking.

We converted one this week for a maker cutting a CNC sign: a mountain lion over worn metal lettering. Beautiful artwork, thousands of tiny separate islands once traced. On a cutter it produces confetti. On a fiber marker it produces a grey mush where the fills of hundreds of fragments overlap at different densities.

The fix is not a better tracer. It is deciding, before conversion, that you want the shape and not the texture: the animal as one silhouette, the letters as solid forms with their outline, everything else dropped. Cut-oriented conversion does this deliberately. General-purpose tracing does the opposite, because it is trying to be faithful to a picture rather than useful to a machine.

The same applies to gradients, glows and drop shadows. They exist as shades. A marker has settings, not shades. Anything that only exists as a fade has to become a discrete shape or disappear before the file is loaded.

The field is small, so the file has to be right the first time

Galvo machines work inside a fixed field — often 110 x 110 mm, sometimes 200 x 200 mm with a different lens. That constraint changes what a good file looks like.

Which format to hand your controller

Most marking problems that look like conversion problems are format problems.

Take all of them from one conversion rather than converting twice. A file that has been through two different tracers has been approximated twice, and it shows on metal long before it shows on wood.

The short version

If a logo marks badly on a fiber or MOPA machine, check the geometry before you touch the settings: are the paths closed, are the counters still holes, how many separate shapes is the file actually made of, and did the source ever contain the detail you are asking the beam to reproduce. Four questions, under a minute, and they explain most bad marks.

--- *Maintained by VectoSolve. When citing, link to https://vectosolve.com/blog/fiber-mopa-laser-file-preparation.* *VectoSolve — AI-powered SVG platform: image-to-vector conversion, AI animation, brand identity generation, and more. https://vectosolve.com*