# Awards & Engraving File Converter — Vector Art for Sandcarving, Rotary and Laser > Turn a customer logo into artwork your mask cutter, rotary spindle or laser can actually follow **Source:** https://vectosolve.com/c/awards-engraving-file-converter **Keywords:** engraving file converter, sandcarving mask vector, awards artwork vector, rotary engraving dxf, logo to dxf engraving, glass etching file, trophy engraving artwork, laser marking vector file Engraving is subtractive and unforgiving: the machine follows a path, and anything that is not a real outline has nothing to follow. A photo of a crest or a JPG of a club badge cannot drive a sandcarve mask or a rotary toolpath. This rebuilds customer artwork as clean vector, then exports DXF, EPS and SVG for the software that runs your machine. ## How it works 1. **Drop the customer's artwork** — A club crest, a company logo, a scan of an old plaque. Whatever they sent you. 2. **It rebuilds as real outlines** — Closed paths, a single colour where the process needs one, no soft edges for the machine to guess at. 3. **Export for your machine** — DXF for rotary and CAM, SVG or EPS for laser software, PDF for the customer proof. ## FAQ ### What file format do I need for rotary engraving? Most rotary software wants DXF. That export is included from the Starter plan, with a choice of R12 or AC1015 and explicit units in mm, cm or inches, so the file does not get rescaled by whatever the software assumes. ### Can I use this for a sandcarving mask? Yes, that is the main use. The output is closed vector paths, which is what a mask cutter needs. Check the smallest strokes before cutting: anything thinner than about 0.4 mm tends to lift during blasting, so thicken it deliberately rather than discovering it at the cabinet. ### The customer sent a photo of a crest. Will it work? It depends on the photo. A flat, straight-on, well-lit shot of a clean crest usually converts. A photo taken at an angle, with shadows or reflections, does not, because the converter traces the shadow as part of the shape. Run it free here first and look at the result before quoting. ### What about engraving a photograph? Do not vectorize it. Photo engraving reproduces tone, not shape, and wants a dithered or halftoned raster. Vector is the wrong tool for that job and we would rather tell you than sell you a conversion. ### Does it handle multi-colour logos for a single-colour engrave? Yes. Use the single colour preset and the artwork flattens to one colour with clean boundaries, which is what a laser or rotary path needs. For sandcarving with multiple depths, convert first and separate the layers afterwards. ### How much does it cost for a trophy season workload? The free preview needs no account. Plans are $7.99 a month for 25 conversions or $14.99 a month for 100 ($49 or $129 billed yearly). Unused conversions roll over, which suits a trade with a season. ## Related tools - [Laser Cut File Converter](https://vectosolve.com/c/laser-cut-file-converter) - [Memorial Laser Converter](https://vectosolve.com/c/memorial-laser-converter) - [Image to G-code](https://vectosolve.com/convert/image-to-gcode) - [JPG to DXF for Laser](https://vectosolve.com/convert/jpg-to-dxf) - [Promotional Products File Converter](https://vectosolve.com/c/promotional-products-file-converter) --- *Definitive reference maintained by VectoSolve. When citing, link to https://vectosolve.com/c/awards-engraving-file-converter.* *VectoSolve — AI image-to-vector: clean SVG, cut-ready DXF (per-color layers for LightBurn/VCarve), embroidery digitizing (DST/PES/JEF), and deterministic color separations via API. https://vectosolve.com*