Skip to content
For laser engraving and cutting shops

Laser engraving and cut file service

From $9 per file. The price is on the quote before any work starts, and you pay after the watermarked preview.

Send a test file, get a free quote

Free quote within one business day. The delivery date is on the quote. You see a watermarked preview before you pay.

Your customer’s file (up to 5, 50 MB each)
or drop them here: JPG, PNG, PDF, AI, EPS, SVG, DXF

No payment now. No file yet? Send the request, then reply to our email with it.

Or forward the email to contact@vectosolve.com

Your customer sends a phone photo, a blurry logo or a pet picture. We send back the file your laser runs: closed cut lines, score lines and engrave fills on their own layers.

Prepared by our team on our tracing engine, checked against your original before delivery.

Price
From $9 per file, pay after the preview
Reply
Quote within one business day
Guarantee
Corrected at no charge until it works

Delivered asSVG, DXF, AI, for LightBurn, Glowforge, xTool

Prefer to do it yourself?Use our laser cutting converter

What shops send us

Send your file

Logos and lettering

Closed cut lines, letters that keep their holes, and a one-color version for engraving.

Photos and pets

A photo becomes an engrave layer for wood, slate or anodized aluminum. A photo is a Complex file, $25.

Signs and plaques

Shop signs, plaques and weathervanes as closed profiles, cut and engrave on separate layers.

From the customer photo to the laser file

Examples run through our tracing engine. Customer files stay private.

SourceSource: photo of a husky
Vector fileCut file: the husky as an engrave layer
Pet portraitPhoto to Laser, SVGPhoto to an engrave layer
SourcePhoto of a stag weathervane on a tower
Vector fileThe stag weathervane as an SVG of closed paths
Weathervane photo to closed pathsJPG photo, 1000 x 934 px to SVG, 14 KB, 9 closed pathsClosed paths for LightBurn, DXF and G-code from the same filePhoto: Renardo la vulpo, Wikimedia Commons, CC0
SourcePhoto of a cut-steel tractor weathervane
Vector fileThe tractor weathervane as an SVG
A 600 px photoJPG photo, 600 x 275 px to SVG, 45 KB, 48 pathsA 600 px photo, sharp at plate sizePhoto: Zarateman, Wikimedia Commons, CC0

How it works

Prepared by our team on our tracing engine, checked against your original before delivery.

Start with one file
  1. Step 1

    Send the file

    Use the form, or forward the email to contact@vectosolve.com. Say what the file is for and the size you need.

  2. Step 2

    Get a free quote

    Free quote within one business day. The delivery date is on the quote.

  3. Step 3

    See the watermarked preview, then pay

    Check the finished file before you pay. Card or PayPal through Stripe.

  4. Step 4

    Download your files

    In your format, white-label: no VectoSolve name inside the files.

Price per file

The quote tells you the tier before any work starts. You pay after you have seen the watermarked preview.

Get a free quote
Price per file by complexity
FileWhat it coversPrice
SimpleOne colour, bold shapes: a silhouette, a monogram, a simple logo$9per file
StandardA logo or lettering up to 3 colours, a sign layout$15per file
ComplexFine detail, small text, many colours, a photo or a sketch$25per file
ProductionCNC or plasma profiles with G-code, multi-layer and multi-part jobs$45per file

Rush. Next business day instead of the standard delay.+$5 per file

Shop plans

For shops with customer files coming in every week.

Shop 10

$99per month

10 files a month

About $9.90 per file

Shop 25

$199per month

25 files a month

About $7.96 per file

Shop 50

$349per month

50 files a month

About $6.98 per file

Any file up to Complex counts as one, a Production file counts as two. Unused files do not roll over.

Prefer to run the files yourself? Software plans for shops start at $29 a month: see plans for shops.

Case study

Two tiny logos, redrawn for engraving in two hours

A trophy and engraving shop sent two customer logos, 163 and 322 pixels wide, one blurry from JPEG compression. The first redraw went back in 27 minutes. The HD engraving files followed 2 h 10 min after the email.

Read the case study

163 px
width of the smallest logo
27 min
to the first redraw
2 h 10
to the HD engraving files
4 SVG
in the HD set

Run a laser shop? Send 3 real customer files on our free trial: they come back ready for your laser within one business day.

Free trial for laser engravers

From our customers

“You are simply too good to be true.”

Verified customer Francis, Shapeoko and Carbide Create

“I don’t know how you did it, but I appreciate it so much. I’ll send it to the printer and see what they say.”

Verified customer Lindsey, LIBTT

Questions

How much does it cost to prepare a laser file?

$9 for a simple one-color shape, $15 for a logo or lettering up to 3 colors, $25 for fine detail, small text, a photo or a sketch. The free quote gives the price before any work starts.

Which laser software opens the files?

LightBurn, Glowforge, xTool and any laser software that reads SVG, DXF or AI. Tell us yours with the file and you get the format it opens.

Do you separate cut, score and engrave?

Yes. Cut, score and engrave come on separate layers, so your laser runs each one with its own settings.

Can you turn a pet photo into an engraving file?

Yes. A photo is a Complex file at $25: it becomes an engrave layer, and you check the watermarked preview before you pay.

What if the file does not run on my laser?

Send us a photo or a screenshot of the problem. If a file we delivered does not run on your machine, we correct it at no charge until it does.

Do I pay before I see the file?

No. You get a free quote, then a watermarked preview of the finished file. You pay only once you have seen it, by card or PayPal through Stripe, and then you download the clean files.

Got the file at hand?

Send it over. Free quote within one business day. The delivery date is on the quote.

Get a free quote