What file formats does LaserPecker Design Space accept?

LaserPecker Design Space (LDS) imports SVG, JPG, PNG, BMP, DXF and G-code. The split that matters: bitmaps (JPG, PNG, BMP) are for fill engraving of images, while SVG and G-code unlock the vector modes — Line Engraving, Fill Engraving and Cutting. A logo that arrives as a JPEG only becomes crisp line work after it has been traced to vectors.

How do I get clean line engraving instead of a filled burn?

Line Engraving follows a path — one stroke of the laser per line, fast and crisp. But a normal trace of a drawing gives you OUTLINES: two parallel paths hugging each side of every stroke, so the laser draws everything twice. Our Single Line preset traces the CENTERLINE instead — one path down the middle of each stroke — which is exactly what line engraving wants. Signatures, handwriting, sketches and technical drawings come out as single clean strokes.

Can I engrave a signature or handwriting with a LaserPecker?

Yes — this is the classic LaserPecker job, and the classic file problem. Photograph the signature, convert it with the Single Line preset, and each pen stroke becomes ONE vector path. In LDS, assign it to Line Engraving: the laser redraws the signature the way the pen wrote it, instead of outlining every stroke like a hollow bubble letter.

Does VectoSolve output work with LDS cutting mode?

Yes. For cutting you want closed vector paths, which is what the standard trace produces — colors separated, contours closed. Export SVG for direct import, or DXF if you prefer; both are accepted by LDS and carry the same geometry.

Which LaserPecker machines do these files work with?

Any machine driven by LaserPecker Design Space — LP4, LP5, LX1 and the rest of the lineup. The files are standard SVG, DXF and G-code; power and speed for your material are set in LDS per device.

SVG for LaserPecker: Line-Engraving Files for LP4, LP5 and LX1

LaserPecker Design Space reads SVG, DXF and G-code natively — but Line Engraving only shines when the file carries true single-line paths, not hollow outlines. Convert any image here; the Single Line preset was built for exactly this machine's best trick.

Secure checkout by StripeCancel anytime from your account

Outline vs Single Line: the Difference You See on Metal

LDS gives you three vector modes — Line Engraving, Fill Engraving, Cutting. The file decides which ones work.

Line engraving wants centerlines

A normal trace outlines every stroke — the laser draws each line twice, like hollow bubble letters. The Single Line preset traces one path down the MIDDLE of each stroke: signatures and sketches engrave the way the pen drew them.

Bitmaps only fill

A JPEG or PNG can be fill-engraved as an image, but it cannot drive Line Engraving or Cutting — those follow vector paths. One conversion turns the same logo into all three modes.

Three formats, one geometry

Export SVG for direct LDS import, DXF when you want size-stable geometry, or G-code. Same clean paths in each container — pick whatever your workflow prefers.

See it before you pay

The full preview is free. You only pay once the file looks right.

Failed conversion? Credit back

If a paid conversion fails, the credit returns to your balance automatically.

Cancel in two clicks

Plans stop from your account page, no email, no phone call.

Support by email

A question about a file or a plan? Write to contact@vectosolve.com.

Customer artwork arriving as screenshots every week?

We also do the whole job as a service: send the customer's file, get a free quote, see the watermarked preview, then pay. From $9 a file, delivered in the format your machine reads, with no VectoSolve name in the files.

Done-For-You Service

SVG for Laser Cutting·SVG for Creality Falcon·SVG for xTool·Centerline Trace·Image to G-code

Preview Your First Image Free

Upload, preview the trace, judge it yourself. No signup for the preview.

Start Converting