Skip to content
AI-Powered Vector Conversion

Large Format File Converter — Fix the Low-Res Logo Before It Goes on a Banner

Rebuild a customer's small JPG as vector so it stays sharp at ten feet wide

The customer wants a three metre banner and sends a 400 pixel logo from their website. Enlarging it enlarges the blur, and the blur is visible from across a car park. This rebuilds the artwork as vector, which has no resolution to run out of, so the same file prints a pull-up banner and a building wrap without a second conversation.

Free preview, no signup

Free preview, no signup
Full-quality output
Watermark-free on every plan
Large Format Mode— clean edges that survive enlargement

Upload your image

Drag & drop or click — PNG, JPG, WebP up to 25MB

Works with: Any wide format RIP · Illustrator · CorelDRAW · Flexi · Onyx

See the Quality

Real conversions from Large Format File Converter users

Website logo rebuilt for a three metre banner

Website logo rebuilt for a three metre banner - Before
PNG/JPG
Website logo rebuilt for a three metre banner - After SVG
SVG Vector
Hover to compare

Low-res JPG cleaned for wide format print

Low-res JPG cleaned for wide format print - Before
PNG/JPG
Low-res JPG cleaned for wide format print - After SVG
SVG Vector
Hover to compare

Scanned artwork turned into scalable vector

Scanned artwork turned into scalable vector - Before
PNG/JPG
Scanned artwork turned into scalable vector - After SVG
SVG Vector
Hover to compare

Simple Pricing

Every plan opens the machine formats. What changes between them is how many files a month.

Machine files every month
Pro — for a shop that cuts every week
$14.99/mo
100 conversions a month · cancel anytime
  • 100 conversions a month — the plans differ by volume, nothing else
  • Embroidery machines: DST (Tajima), PES (Brother), JEF (Janome)
  • Cutters and lasers: Cut-Ready ZIP, Cricut-Ready SVG, Cricut multi-layer ZIP, Lightburn SVG
  • Unused credits roll over
  • Cancel anytime

Unlock Pro Bundle

Included in the annual plan — with every other tool

ALL tools unlocked
API access
Every future tool
save ~49% vs monthly · cancel anytime

How It Works

3 simple steps to perfect SVGs

STEP 1

Drop what the customer sent

The JPG off their website, a screenshot, a logo lifted from a PDF brochure.

STEP 2

It rebuilds as vector

Real outlines instead of pixels, so there is no resolution left to run out of.

STEP 3

Print at any size

PDF and EPS for the RIP, SVG for editing, all from one file that works at A3 and at ten metres.

Large format resolution rules are not the ones you were taught

Print artwork is usually prepared at 300 dpi, and that number gets repeated everywhere. It is wrong for large format, and believing it costs you jobs you could have taken.

What matters outdoors is viewing distance, not absolute resolution. A banner read from three metres away does not need 300 dpi at final size, because the eye cannot resolve it from there. Wide format work is commonly built at 100 to 150 dpi at full size, and billboards go far lower, because nobody stands with their nose against them.

That is genuinely good news for the file a customer sent you, and it is why a 1,200 pixel logo that would be useless on a business card can be fine across a metre of banner. Work out the actual print width and the actual viewing distance before you refuse a job.

Where the customer's file really fails

The failures in large format are rarely about dots per inch. They are about what happens to an edge when you multiply it by twenty.

  • JPG compression artefacts. Every hard edge in a JPG has a faint halo of smeared pixels around it. Invisible at screen size, clearly visible as a grey fringe when that edge is 40 cm long.
  • Type. Small raster text enlarges into mush faster than anything else, and text is what people actually read on a sign. This is the single most common reason a banner looks amateur.
  • The white box. A logo sitting on a white rectangle prints its rectangle. On a coloured banner that is a visible panel, and it is the most frequent reprint in this trade.

Vector removes all three at once: there is no compression, edges are boundaries rather than gradients of pixels, and transparency is real.

What to check before it goes to the RIP

Four things, in order, and they take a minute.

Put it on the actual background colour. Not white. Every transparency fault shows immediately, and none of them show on a white canvas.

Zoom to final print size on screen. Not to fit the window. If the file is going out at two metres, look at it at two metres worth of pixels and judge the edges there.

Check the smallest text. If the customer's tagline is unreadable at final size, converting will not save it, and telling them before printing is a much better conversation than after.

Confirm the bleed and the finishing. Hems, grommets and pole pockets eat into the design. Artwork that runs to the exact edge loses a few centimetres to the hem, and the logo ends up folded over the seam.

When conversion is the wrong answer

Two cases, and both are worth saying out loud to the customer.

Photographs. A photo on a banner should stay a photo. Vectorizing it flattens tone into shapes and it looks like a poster of a poster. If the image is genuinely too small for the print size, an upscale is the right tool, not a conversion.

Artwork that already exists in vector. Before anything else, ask whoever made their signage or their brochures for the original EPS, AI or PDF. It exists more often than customers realise, it needs no conversion, and one email is cheaper than any tool.

When neither applies and the logo is genuinely a small raster, converting is the right move — and the free preview here will show you whether the source can carry the size before you quote it.

Frequently Asked Questions

Less than you think. Viewing distance decides it: wide format is commonly built at 100 to 150 dpi at final size, and billboards far lower, because nobody stands close to them. A 1,200 pixel logo can cover a metre of banner acceptably. Converting to vector removes the question entirely.

Often yes for large format, precisely because the viewing distance is forgiving. What matters more is whether the edges are clean and the type is readable at final size. Run it free here and judge the result at the size it will print.

Most wide format RIPs take PDF or EPS, both free exports here, alongside SVG for editing. If your workflow wants a cut file for contour cutting, DXF is available too.

Because the file has no transparency. A JPG cannot store transparency at all, so the white background is part of the image and it prints. The conversion removes it to a real alpha channel, which is what fixes it.

No. A photo should stay a photo; vectorizing flattens tone into shapes and looks wrong at size. If the photo is too small for the print, upscale it instead. We would rather say so than sell you the wrong conversion.

The free preview needs no account. Plans are $7.99 a month for 25 conversions or $14.99 a month for 100 ($49 or $129 billed yearly), and unused conversions roll over.

Doing this for customers?

If large format printing is your business, you are probably paying per file.

An outside art service charges 6 to 26 dollars a logo and comes back the next day. Redrawing it yourself costs half an hour you could bill. A year here is $49 for 25 conversions every month, every machine format included, which works out cheaper than two outsourced logos.

Everything on this page stays free. This is only worth it if you do volume.

Ready to Create Perfect SVGs?

Join 22,100+ creators who trust VectoSolve

No credit card required • Free watermarked preview