Wrap-Shop Vectors for Vehicle Lettering & Fleet Graphics
The same logo has to weed clean as a 4-inch door decal and read straight from the next lane on a 53-foot trailer. Pixels don't make that trip — geometry does. VectoSolve turns the JPG your customer calls "our logo" into closed vector paths your plotter can cut and your print-and-cut workflow can contour, at every size on the work order — handed over as EPS, vector PDF, SVG and PNG in one download.
Upload your image to convert to EPS
Drag & drop or click — PNG, JPG, WebP up to 25MB
"Just grab the logo off our website"
Every wrap and lettering quote starts the same way: you ask for vector art, and what lands in your inbox is a JPG saved off the company website, a Facebook profile export a couple hundred pixels wide, or a phone photo of the door of the truck you're replacing. The customer is not being difficult — they genuinely believe that is the logo. Somewhere there was an original file; the designer moved on in 2017 and nobody has the password.
The trouble is that a plotter is the least forgiving machine that file will ever meet. Print can blur; a blade cannot. It drives through every coordinate the path data contains, so a sloppy auto-trace doesn't just look rough on screen — it becomes physical: stutters in what should be a sweeping curve, micro-slivers of vinyl that cling to the weeding pick at decal size and turn into visible wobbles once the same art goes on a box-truck side.
VectoSolve rebuilds the artwork as actual geometry: closed paths, near-duplicate colors merged into flat fills you can assign to vinyl, speckles gone. Upload the file they sent, check the watermarked preview against the original, download the EPS — with the vector PDF, SVG and PNG in the same ZIP — open it in your layout software, and quote the job instead of the redraw.
One logo, four sizes, one work order
A typical fleet job puts the same mark at wildly different scales. Here's the ladder it has to climb — and what each rung does to a weak file.
Do the raster math once and the argument is over. A 400-pixel-wide logo printed 8 feet wide works out to about 4 pixels per inch — every pixel becomes a blurry quarter-inch square, and no software invents the detail back. A vector path has no pixels to run out of: the door decal and the trailer side cut from the same file, and the curves are exactly as smooth at both ends of the ladder. That's the entire case for building one clean master before the first sheet of vinyl comes off the roll.
The four places a wrap job can't fake it
Printed panels tolerate some softness at viewing distance. These four parts of the job don't.
Cut vinyl lettering & decals
A plotter does not interpret — it drives the blade through every node the file contains. Trace defects are not cosmetic in cut vinyl: each one is a physical knife move you will weed around and the customer will run a finger over. Closed, low-node paths mean the weed is the design, and an arc cuts as one sweep instead of a chain of stutters.
Contour-cut lines for print-and-cut
The printed graphic can stay raster — the line the plotter cuts around it cannot. Print-and-cut needs a clean closed vector for the knife to follow after the print pass; a ragged or open outline wanders in and out of the printed edge and shows white media on one side, cropped art on the other. Vectorizing gives you that outline even when the customer art never had one.
DOT-regulated door real estate
Under 49 CFR 390.21, a commercial vehicle's USDOT number goes on both sides of the power unit, in sharply contrasting letters legible from 50 feet in daylight. You set those numbers in type — but they sit inches from the customer's logo, and the whole door is read at the same distance. Crisp letterforms across the entire layout is the standard the door is held to.
One master file for the whole fleet
Fleet branding fails in the details: unit 3 lettered from the website JPG, unit 7 re-traced by a different installer, and suddenly the fleet does not match itself. Vectorize the logo once, keep the SVG and EPS in the customer folder, and every door, tailgate, and trailer for the next five years cuts from identical geometry.
The wrap is your craft. The broken logo file is ours.
Let's draw the line honestly, because plenty of tools in this space won't. VectoSolve does not design wraps. Full printed panels — photographic backgrounds, color fades flowing over fenders and body lines — are raster, large-format work: designed over a vehicle outline in your wrap design suite and pushed through a production RIP. That world (FlexiSign production workflows, Onyx, Caldera) is where panel layout, tiling, and printer/cutter control live, and it should stay there. VectoSolve also doesn't supply vehicle templates, doesn't take measurements, and doesn't output plotter-native cut jobs.
What it does is the part that stalls the quote: the customer's artwork itself. Any raster logo becomes clean closed paths — EPS, vector PDF, SVG and PNG in a single ZIP — ready for the cut-lettering and contour-cut parts of the job. A phone photo of existing lettering gets its background stripped so the trace sees only the letters. A 240-pixel web logo gets upscaled before tracing so the edges are real. Master vector in the customer folder, and every job for that client — decal, doors, box, trailer — starts from geometry instead of a JPG hunt.
One format this page deliberately does not hand you: DXF. It is a CAD container — no fills, no spot colors — so it is the wrong file for a printed panel or a contour cut. If a job crosses over into routed dimensional letters or a CNC-cut backer, that conversion lives on its own page: image to DXF.
Re-lettering from the last truck
New truck, no artwork, and the only surviving copy of the logo is on the trade-in's door. The rescue takes three steps.
Shoot it square, strip it clean
Photograph the old door or tailgate as square-on as the parking lot allows — a steep angle bakes perspective distortion into everything downstream. Then run the shot through background removal to pull the lettering off the paint, trim, and reflections.
Background removalUpscale if the source is small
A logo lifted from a website header or an old Facebook post is often a couple hundred pixels wide. Upscaling before the trace gives the vectorizer real edges to find instead of compression haze — the paths come out visibly smoother.
UpscalerVectorize and open it in your layout
The trace returns closed paths with near-duplicate colors merged and speckles removed. The download is one ZIP: EPS for your cutting and print-and-cut software, vector PDF for the customer proof, SVG and PNG for everything else.
JPG to vectorBefore anything goes to the plotter, drop the export into the free cut-ready checker: it flags open paths, live text, and bitmaps hiding inside vector containers, in your browser, with nothing uploaded.
Wrap Shop Pricing
One yearly plan unlocks every tool. One saved redraw covers it.
- Unwatermarked EPS, vector PDF, SVG and PNG on every conversion
- Background removal for photos of existing lettering
- Upscaling for small web logos before tracing
- Batch processing: build fleet masters up to 50 files at once
- Commercial-use license on every file
- 300 conversions / year · unused credits roll over
Vehicle Wrap & Lettering FAQ
The only artwork my customer has is a photo of their old truck. Can I get a cut file from that?
Usually, yes — it is one of the most common rescues in this trade. Shoot the old door as square-on as you can (a raking angle bakes perspective distortion into the trace), run the photo through background removal to strip the paint, trim, and reflections, then vectorize the isolated lettering. The free preview is watermarked, so you can judge the trace quality on a real door before spending anything. Heavy clearcoat glare or a badly faded decal may still need a cleanup pass in an image editor first.
Does VectoSolve create the contour-cut line for print-and-cut jobs?
It creates the thing a contour cut needs: a clean, closed vector outline of the graphic, handed to you as EPS and vector PDF — the two containers print-and-cut suites and RIPs import without an argument. Assigning that path to your workflow's cut spot color (for example the CutContour swatch in Roland VersaWorks) and adding bleed or a cut offset happens in your design software or RIP, the same place it always has. VectoSolve never talks to your printer or plotter — it fixes the artwork upstream of them.
Will the files open in FlexiSign, SignLab, or VinylMaster?
Yes. Downloading on the page gives a ZIP holding the same artwork four ways: EPS, vector PDF, SVG, and PNG. EPS is the safe handoff for cutting and print-and-cut suites that predate solid SVG import — FlexiSign, SignLab, VinylMaster, CutStudio — while newer versions take the PDF or the SVG directly. Colors come through as flat fills, one per traced region, so assigning vinyl or ink is a selection, not an archaeology dig. One honest limit worth knowing: a gradient in the source flattens to a single averaged color in the EPS. Cut vinyl has no gradients anyway, but if a printed panel needs the fade, use the vector PDF from that ZIP — it keeps linear gradients as gradients.
Do you design wraps or supply vehicle templates?
No, and we would rather say so plainly than waste your time. Full wrap panels — photographic backgrounds, gradients flowing across body lines — are designed at scale over a vehicle outline in dedicated wrap and large-format tools, then RIPped for print. VectoSolve does not do vehicle templates, does not take measurements, and does not lay out panels. What it does is fix the artwork that goes onto that layout: the customer's raster logo becomes clean closed paths you can cut, contour-cut, and scale.
Why can't I just scale the JPG up in my layout software?
For a printed panel viewed from thirty feet, sometimes you honestly can — softness hides at distance, and no one should pretend otherwise. The problem starts the moment the job includes cut lettering or a contour line, because then the path itself is the product. Scaling a raster image invents no new information: a 400-pixel logo blown up to 8 feet is about 4 pixels per inch, and a knife path traced from that mush cuts like mush. Vector paths are geometry, not pixels, so the same file is exact at 4 inches and at 40 feet.
What does the USDOT number on a truck door legally require?
Federal rule 49 CFR 390.21 requires a commercial motor vehicle to display its USDOT number on both sides of the power unit, in letters that contrast sharply in color with the background and are legible from 50 feet in daylight while the vehicle is stationary. Note what the rule does not say: it specifies a legibility standard, not a font or a letter height. In practice you set those numbers in a clean typeface rather than tracing them — but they share the door with the customer's branding, and the whole door gets read at that same 50-foot distance, which is why a wobbly logo trace next to crisp compliance lettering looks worse, not better.
What does it cost?
Preview any conversion free — the preview is watermarked. Paying removes the watermark and releases the full ZIP: EPS, vector PDF, SVG, and PNG. The Starter plan is $7.99/month or $49/year for 25 conversions a month, enough to build vector masters for a whole fleet client list, and the same credits pay for background removal and upscaling. If a conversion fails, the credit is refunded automatically.
Related tools:
