Skip to content

Convert Images to DXF Online

Secure & Private

Upload your image to convert to DXF

Drag & drop or click — PNG, JPG, WebP up to 25MB

“You are simply too good to be true.”
Francis, CNC carving on a Shapeoko, wrote to our support
Free previewNo signupFull-quality output

What your machine receives is the point, so here is exactly what comes out. Upload a PNG, JPG or photo and the trace returns DXF R12 (AC1009), the version every controller of the last thirty years reads. Every shape is written as a closed polyline: in an August 2026 audit re-parsing production output on real customer logos, 6,453 of 6,453 exported contours carried the closed flag, which is the geometry CAM needs before it can offset a toolpath. The file declares its units, in millimetres, so it does not import 25.4 times wrong. And the geometry arrives split into one layer per fill colour, each with its own colour index, which is how LightBurn expects to be handed power and speed per layer. Opens in LightBurn, Fusion 360, VCarve, AutoCAD and Inkscape. Free preview, no signup.

A JPG design, and the DXF this page wrote

A real conversion made with this page's own settings on 28 Sep 2026. The picture on the right is drawn from the file itself, nothing retouched.

  • 9 closed outlines on 3 layers, one per colour
  • Units in millimetres: 291 x 111.2 mm
  • R12 DXF: LightBurn, Inkscape, Fusion 360, AutoCAD

The size comes from the pixels of your picture: set the real width in your software before you cut.

A JPG of a mountain and pine forest wall plaque
A JPG design
The DXF of the plaque, every line drawn from the file
The DXF, line by line

Design drawn by VectoSolve for this example

For CNC routers, lasers and plasma tables

A CNC converter for the three machines in your shop

One image, three kinds of machine. The DXF goes to your CAM software, and the G-code in the same download is written for the machine you choose here: a laser, a router or a plasma table.

Free preview, no signup. DXF, G-code and SVG come in the same download.

Photo of an old moose crossing road sign bolted to a post
The moose crossing sign as a clean SVG
A worn road sign photo, redrawn as 32 clean shapesJPG photo, 1337 x 1002 px, 641 KBSVG, 23 KB, 32 paths

Choose the machine, the file follows

  • DXFDXF Fusion 360, VCarve or Carbide Create, when your CAM writes the toolpath
  • G-codG-code presets for a CO2 laser, a router with a V-bit, or a 55 A plasma on mild steel
  • SVGSVG editable paths to rework before the next run
  1. 1

    Laser

    Power, feed rate, kerf and passes tuned for a 40 to 60 W CO2 tube, material by material.

  2. 2

    Router

    Zero Z on top of the wood: the bit follows the line, lifts 5 mm between shapes and goes 0.5 mm deeper each pass.

  3. 3

    Plasma

    Mach3-style output with a pierce delay plus pierce, cut and safe heights, for mild steel from 1 to 6 mm.

Birch plywood panel laser engraved with a stag weathervane, from a VectoSolve SVG
Laser-engraved birch panel. Closed paths for LightBurn, DXF and G-code from the same file.

Product photos are mockups: each design is the real VectoSolve file, not retouched. Source photos are public domain or CC0. Photo: JPark99, Wikimedia Commons, public domain. Photo: Renardo la vulpo, Wikimedia Commons, CC0.

Studio quality

Custom · On quote

Top-of-market quality for complex jobs: large-format murals, detailed illustrations, photo to vector, multi-layer print files. Finished by hand by our team and checked before delivery.

Only need an SVG, not a machine file? Start with the PNG to SVG tool, or the PNG to SVG cut files tool.

Why CNC and laser software needs vectors, not pixels

A DXF (Drawing Exchange Format) file describes geometry as coordinates: lines, arcs, polylines and splines placed on an X/Y plane. That is exactly what a CNC router, laser, or plasma table needs, because the machine drives a tool along paths — it physically cannot follow a grid of colored pixels. When you load artwork into Fusion 360, Vectric VCarve, Carbide Create, Easel, or LightBurn, the CAM engine reads each closed contour and wraps a toolpath around, inside, or on top of it. No vector geometry means no toolpath, which is why dropping a JPG or PNG straight into CAM either fails or forces you into a slow, lossy raster-engrave mode.

Converting an image to DXF turns flat artwork into machine-readable outlines. VectoSolve's AI trace detects edges and rebuilds them as smooth, connected paths you can export as DXF and cut. If you are weighing formats for your workflow, the practical difference is covered in our SVG for CNC and SVG for laser cutting guides — DXF is the CAM-native choice, SVG is the design-native one, and most makers keep both around.

What converts cleanly — and what to expect from photos

Image-to-DXF works best on artwork that already reads as distinct shapes. The conversion is honest about its limits, so set expectations up front:

  • Excellent: high-contrast logos, silhouettes, monograms, line art, stencils, and signage lettering. These have clean boundaries the tracer can turn into crisp closed contours. A customer logo has its own walkthrough on logo to DXF, and a PNG with a transparent background is the cleanest input there is, for the reasons set out on PNG to DXF.
  • Good with cleanup: hand-drawn sketches, badges, and detailed icons — expect to merge or delete a few stray shapes after import.
  • Stylized only: photographs. A photo has no hard edges to follow, so tracing produces a posterized, outlined interpretation — think tonal bands and simplified shapes, not a photo-real cut. For portraits or scenery this can be a deliberate art style, but it will never be a faithful reproduction, and thin isolated slivers may be too fragile to cut in wood or acrylic.

Simplify before you convert: crop tightly, boost contrast, and remove busy backgrounds so the tracer spends its detail budget on the shape you actually want to cut.

Scale and units — the step that ruins the most first cuts

DXF does not reliably store a unit. The file records numbers like 100, but whether that means 100 mm, 100 inches, or 100 arbitrary units depends on how the file was written and how your CAM software interprets it. The result is the classic mistake: geometry that imports at 25.4x too big or too small, or a logo that lands a few millimeters off the size you designed.

Always verify real-world dimensions before generating toolpaths. After importing your DXF into Fusion 360, Vectric, Carbide Create, or LightBurn:

  • Measure a known edge with the dimension tool and confirm it matches your intended mm or inch value.
  • If the software asks for import units (mm vs inch), pick deliberately — do not accept the default blindly.
  • Scale the whole drawing to the target size once, before you assign any operations, so kerf and offsets are calculated against the true dimensions.

Thirty seconds of measuring here prevents a scrapped sheet of plywood later.

Cut vs engrave: closed paths, open paths, and centerlines

How your geometry is drawn decides what the machine does with it, so it pays to think in terms of operations before you cut:

  • Closed paths (contours that start and end at the same point) become cut, pocket, or profile operations. A closed outline is what lets CAM offset a toolpath to the inside, outside, or centerline of the line.
  • Open paths (lines that do not loop back) are ideal for engraving, scoring, and V-carving — surface marks that do not sever the material.
  • Centerline vs outline for lettering: a normal traced letter is an outline (two edges you can cut around). For engraving text, a single-line / centerline path lets a laser or V-bit follow the stroke once instead of tracing both sides of every letter, which is faster and cleaner for labels and fine text.

You do not have to build that separation by hand: the DXF arrives with one layer per fill colour, each carrying a distinct DXF colour index, which is the split LightBurn and most CAM read as "assign power and speed per layer". Your job is to decide which colour is a cut and which is a score, not to sort geometry first. You can sanity-check the file with our DXF checker to catch open contours and duplicate lines before they cost you a run.

From image to finished part: the real workflow

Once the geometry is right, the shop-floor considerations are the same for any traced DXF:

  • Kerf: the tool removes material with real width — a router bit's diameter or a laser's beam. CAM compensates by offsetting the toolpath, but you must tell it which side of the line to keep, or a part cut on the wrong side will be off by one kerf width all around.
  • Holding tabs: on a CNC router, small tabs left in the cut keep the part from breaking loose and getting thrown before the pass finishes. Add them on profile cuts.
  • Nesting: arrange multiple parts to share edges and minimize wasted stock, but leave enough bridge material that thin webs don't snap during cutting.
  • DXF R12: when exporting, DXF R12 (AutoCAD Release 12) is the safest interchange version. It is the oldest widely supported flavor, so nearly every controller and CAM package reads it without choking on newer entity types.

Put together, the end-to-end path is: upload your image, let the AI vector-trace it, export DXF (R12), import into your CAM software, set units and scale to real size, assign cut vs engrave layers, then generate and simulate toolpaths before you run the job. If your source art is a photo or logo saved as a JPG, start with our dedicated JPG to DXF converter, which is tuned for the compression artifacts photos carry.

The drawing arrived as a PDF?

The PDF to DXF converter takes the PDF itself: it renders the first page in your browser and traces it into closed polylines, so you do not have to export an image first. It is a retrace, not an extraction, so when exact coordinates matter, start from the original vector file instead.

See the conversion

What Do Users Ask About This Converter?

10 questions about Image to DXF conversion

Upload your PNG or JPG to VectoSolve and click Convert. The AI vectorizes your image into clean paths, then exports a DXF R12 file in which each fill colour sits on its own layer with its own colour index. Import the DXF directly into LightBurn, Fusion 360, VCarve, or any CAD/CAM software.

DXF (Drawing Exchange Format) is the standard file format for CNC routers, laser cutters, plasma tables, and water jet machines. It stores 2D geometry as polylines that machines read to cut, engrave, or mill materials like wood, acrylic, metal, and leather.

Yes, and it is split the way a laser operator actually works: one layer per fill colour, each carrying its own DXF colour index, rather than a fixed cut-versus-engrave pair. That matters because a traced image is all fill — a cut/engrave split keyed on strokes would hand you an empty cut layer. With a layer per colour, LightBurn (and VCarve, Fusion 360, RDWorks) lets you assign power and speed per layer: the black outline cuts, the interior colours score or engrave, and you decide which is which instead of us guessing.

The DXF files work with LightBurn, AutoCAD, Fusion 360, VCarve Pro, Easel (X-Carve), Carbide Create, CorelDRAW, Inkscape (free), RDWorks, LaserGRBL, and any software that reads AutoCAD 2000 DXF format.

PNG, JPG, JPEG, WEBP, GIF, BMP, AVIF and SVG. A PDF or a TIFF is also accepted and rendered in your browser first — the PDF's first page, the TIFF's first image — which means a vector PDF is retraced rather than preserved; if you want its geometry kept exactly, save it as SVG in Illustrator or Inkscape and convert that file with the direct SVG to DXF tool at vectosolve.com/svg-to-dxf, which writes the paths without tracing them, because an SVG dropped here is traced like any picture. For best results with CNC and laser cutting, use high-contrast images with clear outlines: logos, line art, silhouettes and stencil designs.

Every DXF conversion includes a multi-format ZIP with your file in DXF, SVG, PNG, and G-code formats. You get the standalone DXF file plus the bonus ZIP — all from a single conversion.

Closed, and we test it: in an August 2026 audit re-parsing our production DXF output on real customer logos, 6,453 of 6,453 exported polylines carried the closed flag (DXF R12 / AC1009). Closed contours are what let Fusion 360, VCarve, and LightBurn offset a toolpath inside or outside the line — an open contour forces manual joining before you can cut. If you want to check any DXF yourself, our free DXF checker flags open contours and duplicate lines before they cost you a run.

Both, and plasma tables as well. The DXF suits all three through your own CAM, while the G-code in the download follows the machine and material picked on the page.

No. It engraves along the line, with no tool offset. For cut-outs or pockets, load the DXF or the SVG in your CAM software and let it offset the toolpath.

Trace it here, then open the DXF in VCarve or Carbide Create and choose the operation there: a profile to cut the letters out, a pocket or a V-carve to sink them.

Ready to Convert Your Image?

Preview your result free, with no signup, before you download.

Doing this for customers?

If laser, CNC or plotter work is your business, you are probably paying per file.

An outside art service charges 6 to 26 dollars a logo and comes back the next day. Redrawing it yourself costs half an hour you could bill. A year here is $49 for 25 conversions every month, every machine format included, which works out cheaper than two outsourced logos.

Everything on this page stays free. This is only worth it if you do volume.