Skip to content
AI-Powered Vector Conversion

Awards & Engraving File Converter — Vector Art for Sandcarving, Rotary and Laser

Turn a customer logo into artwork your mask cutter, rotary spindle or laser can actually follow

Engraving is subtractive and unforgiving: the machine follows a path, and anything that is not a real outline has nothing to follow. A photo of a crest or a JPG of a club badge cannot drive a sandcarve mask or a rotary toolpath. This rebuilds customer artwork as clean vector, then exports DXF, EPS and SVG for the software that runs your machine.

Free preview, no signup

Free preview, no signup
Full-quality output
Watermark-free on every plan
Engraving Mode— closed paths, single colour, machine ready

Upload your image

Drag & drop or click — PNG, JPG, WebP up to 25MB

Works with: LightBurn · Rotary engraving software · CorelDRAW · Illustrator · Mask cutters

See the Quality

Real conversions from Awards & Engraving File Converter users

Club crest rebuilt as a cuttable mask path

Club crest rebuilt as a cuttable mask path - Before
PNG/JPG
Club crest rebuilt as a cuttable mask path - After SVG
SVG Vector
Hover to compare

Company logo cleaned for rotary engraving

Company logo cleaned for rotary engraving - Before
PNG/JPG
Company logo cleaned for rotary engraving - After SVG
SVG Vector
Hover to compare

Scanned badge turned into single-colour vector

Scanned badge turned into single-colour vector - Before
PNG/JPG
Scanned badge turned into single-colour vector - After SVG
SVG Vector
Hover to compare

Simple Pricing

Every plan opens the machine formats. What changes between them is how many files a month.

Machine files every month
Pro — for a shop that cuts every week
$14.99/mo
100 conversions a month · cancel anytime
  • 100 conversions a month — the plans differ by volume, nothing else
  • Embroidery machines: DST (Tajima), PES (Brother), JEF (Janome)
  • Cutters and lasers: Cut-Ready ZIP, Cricut-Ready SVG, Cricut multi-layer ZIP, Lightburn SVG
  • Unused credits roll over
  • Cancel anytime

Unlock Pro Bundle

Included in the annual plan — with every other tool

ALL tools unlocked
API access
Every future tool
save ~49% vs monthly · cancel anytime

How It Works

3 simple steps to perfect SVGs

STEP 1

Drop the customer's artwork

A club crest, a company logo, a scan of an old plaque. Whatever they sent you.

STEP 2

It rebuilds as real outlines

Closed paths, a single colour where the process needs one, no soft edges for the machine to guess at.

STEP 3

Export for your machine

DXF for rotary and CAM, SVG or EPS for laser software, PDF for the customer proof.

Every engraving process needs a path, not a picture

This is the thing that separates engraving from printing, and it decides which files are usable before anything else does. A printer can put down pixels. An engraving machine follows a line: the spindle traces it, the laser head sweeps it, the mask cutter cuts along it.

A raster image has no lines in it. It has a grid of coloured squares that happen to look like lines to a human eye. Software can guess at the boundary between light and dark, but if the edge is blurred over four pixels, the guess wanders, and the wander shows up as a ragged mask or a toolpath that hunts.

So the practical question about any customer file is not whether it looks sharp on screen. It is whether there is a real boundary in it for the machine to follow.

Sandcarving is the least forgiving, and the most common

A sandcarve mask is cut from resist, weeded by hand, and blasted. Which means every flaw in the artwork becomes physical work at the bench:

  • Wandering edges from a blurred source make a mask that looks fuzzy after blasting, and there is no fixing it afterwards.
  • Stray specks in the file become tiny islands of resist that you have to find and weed one by one, or they blast as pinholes in the glass.
  • Counters in lowercase a, e and o must be genuinely separate shapes, or they weed out and fill in solid.
  • Hairlines under about 0.4 mm lift during blasting whatever you do, so they need thickening deliberately before the mask is cut, not discovered after.

All four are decided in the file. None of them are visible at the size you review the artwork on screen.

Rotary, laser and photo work want different things

Rotary engraving follows a toolpath, and the cutter has a physical width. Fine detail smaller than the tool simply cannot be cut, so a logo full of thin serifs needs simplifying before it goes anywhere near the machine. DXF is what most rotary software wants, and units matter: a file that arrives without them gets scaled by whatever the software assumes.

Laser marking is more forgiving on detail but needs a decision about fill versus outline, and that decision belongs in the artwork. A shape that looks filled on screen but is actually an outline will mark as a thin line on anodised aluminium and surprise you.

Photo engraving is the exception on this page: it genuinely wants a raster, dithered or halftoned, because it reproduces tone rather than shape. If the job is a portrait on black granite, vector is the wrong answer and you should not convert it.

Trophy season and the artwork that arrives with it

Awards work arrives in bursts, from customers who are not designers: a school, a golf club, a company running its annual dinner. The artwork is a crest photographed off a wall, a logo pulled from a Facebook page, or a scan of last year's plaque.

The fastest route is still one email asking whoever handles their branding for the original file, saying the words vector, EPS or AI. When it exists, the job is done before it starts.

When it does not, converting is the right move, but the source decides the outcome. A clean 1,000 pixel logo rebuilds cleanly. A 200 pixel one does not, and a crest photographed at an angle needs a person, not a converter. Finding that out before you quote the job is worth more than finding out at the blast cabinet.

Frequently Asked Questions

Most rotary software wants DXF. That export is included from the Starter plan, with a choice of R12 or AC1015 and explicit units in mm, cm or inches, so the file does not get rescaled by whatever the software assumes.

Yes, that is the main use. The output is closed vector paths, which is what a mask cutter needs. Check the smallest strokes before cutting: anything thinner than about 0.4 mm tends to lift during blasting, so thicken it deliberately rather than discovering it at the cabinet.

It depends on the photo. A flat, straight-on, well-lit shot of a clean crest usually converts. A photo taken at an angle, with shadows or reflections, does not, because the converter traces the shadow as part of the shape. Run it free here first and look at the result before quoting.

Do not vectorize it. Photo engraving reproduces tone, not shape, and wants a dithered or halftoned raster. Vector is the wrong tool for that job and we would rather tell you than sell you a conversion.

Yes. Use the single colour preset and the artwork flattens to one colour with clean boundaries, which is what a laser or rotary path needs. For sandcarving with multiple depths, convert first and separate the layers afterwards.

The free preview needs no account. Plans are $7.99 a month for 25 conversions or $14.99 a month for 100 ($49 or $129 billed yearly). Unused conversions roll over, which suits a trade with a season.

Doing this for customers?

If engraving and awards work is your business, you are probably paying per file.

An outside art service charges 6 to 26 dollars a logo and comes back the next day. Redrawing it yourself costs half an hour you could bill. A year here is $49 for 25 conversions every month, every machine format included, which works out cheaper than two outsourced logos.

Everything on this page stays free. This is only worth it if you do volume.

Ready to Create Perfect SVGs?

Join 22,100+ creators who trust VectoSolve

No credit card required • Free watermarked preview