SVG to G-code for
CNC Plasma Cutter
Image to vector to plasma-ready G-code in seconds. Calibrated 55A presets for mild steel 1 to 6mm, Mach3-compatible output, USB-ready for your CNC table.
New: Precision Cut
A cut path that follows your design to the pixel
Made for plasma tables: the torch follows your design, not a guess of it.
- Holes stay holes: the inside of O, A, R and B is cut out, even if your software ignores fill rules.
- Small lettering keeps its shape: straight edges stay straight, corners stay sharp.
- Clean DXF: no tiny segments that slow the torch or the laser head.
Best on one-color logos and text. Same price as a standard conversion.
Try Precision CutWhy You Need Clean SVG for Plasma Cutting
A plasma torch does not forgive sloppy geometry. Stray nodes, hairline gaps, and overlapping paths show up as blown corners, double pierces, or a torch that fires into thin air. Plasma kerf runs 0.8 to 1.5mm wide on a 55A machine, which is roughly four to five times wider than a fiber laser, so the offset has to be baked into the toolpath or your finished part comes out undersized.
VectoSolve traces your image to clean closed loops, then applies the plasma kerf offset, pierce points, and lead-ins automatically. The output is one continuous .gcode file you can drop on a USB stick and load straight into Mach3, FireControl, or Plasmac. No drawing in SheetCAM, no manually scripting M3 / M5 commands, no guessing pierce delays. Upload artwork, pick the material thickness, fire the torch.
From Artwork to Plasma G-code in 3 Steps
Upload, vectorize, USB. That is the whole workflow.
Upload Your Image
Drop a PNG, JPG, or WebP up to 25MB. Logos, silhouettes, signs, brackets, and farm gate medallions all cut clean.
AI Vectorize with Plasma Preset
Pick mild steel thickness (1 to 6mm). The AI traces clean closed paths, applies kerf compensation, and writes G-code with M3 firing, pierce delays, and torch height moves.
Download .gcode to USB
Save the file, copy it to your USB stick, and load it in Mach3, FireControl, or Plasmac. Touch off, zero the torch, and run the job.
Why Plasma Shops Choose VectoSolve
Clean Closed Paths
Every contour comes out as a single closed loop, no double-traced edges, no stray nodes that make the torch double-pierce or stall mid-cut.
Mach3-Ready Output
Standard M3 / M5 torch firing and G4 P pierce delays. Drops straight into Mach3, FireControl, or Plasmac without post-processing in SheetCAM.
USB Workflow
One .gcode file, one USB stick, one button on the controller. No network setup, no cloud sync, no plugin install on the shop PC.
Pierce-Perfect Timing
Pierce delay scales with material: 0.2s at 1mm, 1.2s at 6mm. Pierce height 3 to 4mm, cut height 1.5mm, safe Z 25mm. Tuned against real cut charts.
Kerf-Aware Geometry
Plasma kerf is wider than a laser. We offset the toolpath by 0.8 to 1.5mm depending on amperage so your finished part matches the design dimension.
55A Calibrated Presets
Feed rates calibrated against Hypertherm Powermax45 cut charts for mild steel. Adjust for stainless (~85% feed) or aluminum (~70% feed) in one click.
What Plasma Cutters Make with VectoSolve
Real jobs running off real tables in real shops
Metal Signs
Shop signs, name plates, wall art, monograms cut from 3mm mild steel and powder coated
Farm Gates
Custom ranch entry medallions, brand logos, livestock silhouettes in 4 to 6mm plate
Equipment Plates
Serial plates, ID tags, machinery badges and warning placards in stainless or aluminum
Custom Brackets
Gussets, mounting plates, jig fixtures and structural brackets cut to spec
Simple Pricing for Plasma Shops
One yearly plan unlocks every tool. G-code and DXF export included.
- All export formats: SVG, DXF, EPS, PDF, and cut-ready ZIP
- All niche modes: Cricut, laser, embroidery, Etsy & brand tools
- SVG Editor Pro + batch processing
- Commercial-use license on every file
- 300 conversions / year · unused credits roll over
See it before you pay
The full preview is free. You only pay once the file looks right.
Failed conversion? Credit back
If a paid conversion fails, the credit returns to your balance automatically.
Cancel in two clicks
Plans stop from your account page, no email, no phone call.
Support by email
A question about a file or a plan? Write to contact@vectosolve.com.
For plasma and metal fabrication shops
SVG to G-code for the plasma table, with pierce delay and torch on and off
Plasma Mode traces the art into cut paths and writes G-code in the Mach3 dialect: M3 and M5 around each cut, a G4 pierce delay, and pierce, cut and safe heights already set. The same download carries the SVG and a DXF for SheetCAM or your nesting software.
Files in the plasma download
- G-code Mach3 style, for Mach3, FireControl, Plasmac or LinuxCNC
- DXF for SheetCAM, HiNest or TPL Nest, when the shop posts its own code
- SVG the editable outlines, to fix a bridge or a hole before cutting
Custom · On quote
Top-of-market quality for complex jobs: large-format murals, detailed illustrations, photo to vector, multi-layer print files. Finished by hand by our team and checked before delivery.
Artwork for a screen, a print or a vinyl cutter starts the same way: the VectoSolve vectorizer for any picture, the PNG to SVG converter for Cricut and Silhouette when the shapes will be cut.
CNC Plasma G-code FAQ
What controllers does the G-code support?
The output works on Mach3, FireControl, and Plasmac (LinuxCNC) out of the box, plus most portable 55A CNC plasma tables that accept M3 / M5 torch firing and G4 P pierce delay commands. We emit the Mach3 standard dialect, which is the widest-supported baseline in the hobby and small-shop world.
Can I cut mild steel 1mm to 6mm with these presets?
Yes. The feed rates, pierce delays, and torch heights are calibrated against published Hypertherm Powermax45 cut charts for 1mm, 2mm, 3mm, 4mm, and 6mm mild steel at 55A. Thinner stock uses faster feed and shorter pierce (0.2s); thicker stock slows down and extends pierce (1.2s at 6mm).
Do I need separate nesting software like HiNest or TPL Nest?
Only if you want to fit multiple parts on one sheet. Our G-code is generated per design, ready to fire on a single piece of stock. For multi-part sheets and material yield optimization, drop the SVG or DXF into HiNest, TPL Nest, or SheetCAM first and then post the nested job for your controller.
What about pierce delay and torch height control?
All of it is baked into the preset. Pierce height sits at 3 to 4mm above the plate, cut height drops to 1.5mm, and safe Z rapid moves up to 25mm between paths. Pierce delays scale with material: 0.2s at 1mm steel, up to 1.2s at 6mm. If your table runs torch height control (THC), the cut-height moves give it the reference it needs.
Will it work with stainless or aluminum?
The 55A mild steel presets are a solid baseline for non-ferrous metals too. For stainless, drop feed rate to about 85% of the mild steel value at the same thickness. For aluminum, run roughly 70% feed and expect more dross underneath. Both also benefit from a fresh set of consumables since they erode the nozzle faster than mild steel.
What if my controller uses different M-codes?
We emit the Mach3 standard (M3 to fire torch, M5 to extinguish, G4 P for pierce delay). If your controller expects M07 / M08 or another flavor, contact support with the controller model and we will generate a custom G-code variant for you. Most owners just run a find-and-replace in a text editor and it ports across in under a minute.
Which plasma preset suits heavy gauge plate?
Bold Cut: it keeps fewer, larger shapes that the torch follows cleanly on thick plate. Fine Detail is for thin gauge and small work, and Standard is the default between the two.
Why do small holes come out badly on a plasma table?
The arc is wide and the pierce is slow, so a hole smaller than about the plate thickness rarely comes out round. Enlarge or remove small details in the design, or drill those holes after cutting.
Can a customer logo become a metal sign on the plasma table?
Yes, that is the usual job: a logo from a website or a photo of an old sign. Before cutting, check letters with an inside island, such as O, A or R: without a bridge, their centers drop out of the sheet.
Related pages:
Pick the right converter for your plasma workflow
Most plasma controllers want G-code or DXF. Start from whichever source format you have.