Skip to content

Toolpath-Ready DXF & SVG for CNC Routing

Your CAM software can't offset a path that never closes — that's the whole story behind VCarve's "open vectors" warning. Upload the JPG your customer sent, or the screenshot you found last night, and download a DXF whose outlines close: R12, declared in millimeters, one layer per color found in the artwork — the file VCarve, Aspire, Carbide Create, Easel and Fusion 360 all import and can pocket, profile and V-carve without node surgery. The SVG it was traced from travels in the same ZIP.

Closed paths a toolpath can offset DXF, SVG, PNG & G-code in one ZIP Credits auto-refunded if a conversion fails
Secure checkout by StripeCancel anytime from your account
Precision Cut output: WELDING and FAB CO. as one cut path, with the inside of every letter cut through
Straight from Precision Cut: one cut path, and the inside of D, G, A, B and O is cut through, not painted over.

New: Precision Cut

A cut path that follows your design to the pixel

Made for CNC routers: profile cuts that match your artwork, with a clean DXF.

  • Holes stay holes: the inside of O, A, R and B is cut out, even if your software ignores fill rules.
  • Small lettering keeps its shape: straight edges stay straight, corners stay sharp.
  • Clean DXF: no tiny segments that slow the torch or the laser head.

Best on one-color logos and text. Same price as a standard conversion.

Try Precision Cut

Pixels Don't Have an Inside

Every job that isn't your own design starts the same way: someone hands you pixels. The customer's "logo file" is a JPG off their website. The family-name sign a spouse ordered arrives as a Pinterest screenshot. The shop down the road wants their twenty-year-old mascot carved into a plaque and the only surviving copy lives on a faded business card.

A toolpath can't be computed from any of that, because a raster image is a grid of colored squares with no geometry in it. Before VCarve or Fusion can offset a cutter to the inside of a letter, something has to define where the letter is — as a closed loop of curves. The built-in bitmap tracers in CAM software will try, but anyone who has run one on a compressed JPG knows the output: outlines that almost close, edges built from staircase segments, and a constellation of specks that each become their own two-second plunge-and-retract. What follows is the real cost — an evening in node-editing mode, joining gaps and deleting debris, on a job you quoted at an hour.

VectoSolve replaces that trace-and-repair session. Upload the image, and the AI conversion returns closed paths with speckles removed and near-duplicate colors merged, written straight out as a DXF — geometry your CAM software can use as-is. If the source is a photo, strip the background with background removal first; if it's a thumbnail-sized web image, upscale it before tracing and the curves come out noticeably smoother.

Where a Dirty Trace Dies in CAM

The file opens fine. The preview looks fine. Then you ask for a toolpath, and one of these four things happens.

The open-vector wall

Pocketing and inside/outside profiling need closed loops — an open outline has no "inside" to offset into. VCarve and Aspire flag these shapes and park your job until every gap is joined. A sloppy auto-trace leaves dozens of them; a clean trace leaves none.

The wrong-side cut

Self-intersecting outlines and duplicate overlapping paths confuse the offset math: the toolpath flips sides mid-shape and the part comes out fat where it should be thin — or the cutout falls inside the keeper. You usually find out after the sheet is ruined.

The thousand-node curve

A curve traced as hundreds of micro-segments machines as hundreds of micro-segments: the controller decelerates through every junction, cut time stretches, and the "curve" shows facets you'll be sanding out. Fewer, smoother nodes cut faster and cleaner.

V-carve on a hairline

A V-carve toolpath sets depth from the width of the region it's filling. Trace a thin raster stroke and you get two parallel paths a hair apart — a sliver the V-bit "carves" as a scratchy, near-zero-depth groove. V-carving wants solid letterforms and shapes, not double-stroke outlines of them.

VectoSolve's conversion is tuned against exactly these: outlines close into loops, a cleanup pass deletes stray speckles, and color merging collapses JPG noise into solid regions a V-carve can actually fill. And before you download anything, the converter above counts the contours that came out closed against those that did not, and prints the size the DXF will land at — read it there, not in your CAM.

Design for the Bit, Not Just the Picture

A clean vector is necessary, not sufficient. The cutter is a rotating cylinder or cone, and its geometry sets limits no file format can override — worth checking before you promise a customer sharp serifs.

1/4" endmillInside corners radiused at 1/8"The workhorse for clearing and profiles. Details narrower than the bit simply don't get machined — keep interior features comfortably wider.
1/8" endmillInside corners radiused at 1/16"Finer pockets and small parts at slower clearing rates. Common as the finishing pass after a 1/4" roughing pass.
60°/90° V-bitGenuinely sharp interior detailDepth follows region width, so crisp serifs and fine ornament work — as long as the vector gives it solid closed regions to carve, not hairline slivers.
Ball nose3D contoured surfacesRelief carving territory, driven by grayscale depth maps or 3D models rather than 2D outlines — a different workflow from everything on this page.

Inside corners are always round. An endmill leaves every interior corner radiused at its own radius — a 1/4" bit leaves 1/8" corners no matter how sharp the path is. When the design needs sharper: V-carve it, follow up with a smaller finishing bit, or accept the radius as part of the look.

Joinery needs overcut corners. If a square tenon or shelf has to seat into a routed slot, the corner radius will block it. The standard fix is dogbone or T-bone fillets that overcut each corner just past square — a deliberate CAD/CAM step (VCarve's fillet tool offers both), made on the design, never something a vectorizer should invent for you.

Feeds, speeds, and depth stay yours. Chip load, pass depth, and ramp-ins depend on your spindle, your material, and your machine's rigidity — a Genmitsu benchtop and a ShopSabre don't share numbers. No vector file carries that knowledge, and this page won't pretend one can.

Getting the File Into Your CAM Software

One conversion, several import doors. The download is a single ZIP: the DXF, the SVG it was traced from, a PNG, and a plain outline G-code — use whichever your program prefers.

VCarve & Aspire

Import the DXF, or the SVG beside it. Closed loops mean the pocket and inside/outside profile dialogs work immediately instead of flagging open vectors. The DXF arrives as outlines without fills — normal, since DXF has no fill concept — split into one layer per color found in the artwork, so each region can take its own toolpath.

Carbide Create & Easel

SVG is the happy path for both — drop the file in and the shapes land ready to assign toolpaths on a Shapeoko, X-Carve, Onefinity, or Genmitsu. Carbide Create also reads DXF if your library is already organized around it.

Fusion 360

Insert SVG or DXF into a sketch, then extrude or feed Manufacture directly. Verify scale after every insert — measure one known dimension and scale the sketch if needed. SVG sizing in particular has a history of arriving at unexpected scale.

The units trap — check it free

Many DXF files carry no unit declaration, so the importer guesses — and a millimeter file read as inches is 25.4x off. Ours declares millimeters, but it lands at the artwork's pixel size read at 96 dpi, so set your finished dimension in CAM. Drop any DXF on the free DXF checker to see its units and true extents before it costs you a sheet of stock. SVGs get the same pre-flight at the cut-ready checker. Both run in your browser.

The Toolpath Is Still Yours

Plain terms, so nobody buys the wrong thing: this page converts an image into clean closed vectors and hands back a DXF, with the SVG, a PNG and an outline G-code in the same ZIP. It does not generate toolpaths, nest parts on a sheet, add tabs or dogbones, or choose feeds and speeds. That work happens in VCarve, Aspire, Carbide Create, Easel, or Fusion 360 — with your machine and material knowledge in the loop, which is exactly where it belongs.

About the .gcode in that ZIP: it is the same plain outline program the image to G-code converter writes — one pass along each contour, a power value, no cutting depth. Useful on a small GRBL engraver, and nothing more: it is not a router toolpath, so on a router the file to open is the DXF.

The CNC Prep Toolkit

CNC Vector Pricing

One yearly plan unlocks every tool — vectorizer, DXF export, background removal, upscaling, batch.

$49/yrabout half the monthly price, one plan unlocks everything
BEST VALUE
Annual plan
$49/yr
That is about $4.08/mo, half the monthly price · cancel anytime
  • DXF and SVG export for every CAM package, with PNG and outline G-code in the same ZIP
  • Background removal + upscaling to rescue rough source art
  • Batch processing — clear a folder of customer art in one run
  • Commercial-use license on every file
  • 300 conversions / year · unused credits roll over
Cancel anytime
|Visa, Mastercard, Apple Pay

CNC Vector FAQ

VCarve says "open vectors" — what does that mean and how do I fix it?

A profile toolpath offsets the cutter to the inside or outside of a shape, and a pocket clears everything inside a boundary. Both only make sense if the outline is a closed loop — an open path has no inside. VCarve and Aspire flag those shapes as open vectors and either refuse the toolpath or limit you to cutting on the line itself. The manual fix is hunting down each gap with the Join Open Vectors tool. The upstream fix is to start from a trace that closes its outlines in the first place: the DXF this page exports writes every traced outline as a polyline carrying the closed flag when it returns to its start, and the report shown before you download counts how many contours closed and how many did not.

Should I import SVG or DXF into my CAM software?

Both usually work; the practical answer depends on your program. Carbide Create and Easel treat SVG as the native interchange format. VCarve and Aspire accept SVG, DXF, EPS, and PDF. Fusion 360 inserts either into a sketch, but always verify scale after insert — measure a known dimension. DXF is the safer handoff to older or industrial CAM chains. This page converts to DXF and puts the SVG it was traced from in the same ZIP, next to a PNG and a plain outline G-code, so you are not locked into one import door.

My DXF imported at the wrong size. What happened?

Classic units trap: many DXF files, especially R12-era exports, carry no unit declaration, so the importing program guesses — and a millimeter file read as inches lands 25.4x off. The DXF written here is R12 but does declare millimeters in its header, and the drawing comes out at the artwork's own pixel dimensions read at 96 dpi — a 1000-pixel-wide image lands around 265 mm wide. Treat that as a starting point, not as your finished sign: set the real dimension in CAM before you cut. You can inspect any DXF's units, extents, and entities with our free DXF checker — it runs in your browser.

Does VectoSolve generate toolpaths or G-code?

No toolpaths, and we won't pretend otherwise. Toolpaths, tabs, feeds, speeds, depth of cut, and post-processing belong to your CAM software and your knowledge of your machine and material. What this page makes is the geometry CAM consumes: a closed-path DXF from any image. The ZIP does carry a .gcode file, and it is worth knowing exactly what it is — the same plain GRBL outline program our image to G-code converter writes, one pass along each contour with a power value and no cutting depth. That suits a small GRBL engraver. It is not a router toolpath: on a router, open the DXF.

How do I get sharp inside corners on a CNC router?

A spinning bit is round, so every inside corner comes out radiused at the bit's radius — a 1/4" endmill leaves 1/8" corners no matter how sharp the vector is. Your options: V-carve the detail (the V-bit tip reaches into corners an endmill can't), run a smaller finishing bit on a second pass, or — for slot joinery where a square tenon has to seat — add dogbone or T-bone fillets that overcut the corners. Those fillets are a CAD/CAM step (VCarve's fillet tool has both built in), not something a vectorizer should ever add for you.

What kind of image converts best for CNC work?

Flat, high-contrast art: logos, lettering, silhouettes, line illustrations, mandala-style panels. If the source is a photo, isolate the subject with background removal first, and if it's a tiny web image, upscale it before tracing so the paths come out smooth instead of lumpy. Note that grayscale photo relief carving is a different technique entirely — it drives a ball-nose bit from pixel brightness, not from vector outlines — so don't vectorize a photo expecting a 3D relief.

What does it cost?

The conversion preview is free and watermarked, so you see the paths and their measured size before paying anything. Downloading the file costs one conversion credit, which comes with a plan: the annual plan on this page is $49 for 300 conversions a year, and the checkout that opens after a conversion lists the monthly plans by volume. Every plan opens every export format — what changes between them is how many files a month you get. If a conversion fails, the credit is refunded automatically.

Related tools: