DXF Files for Waterjet Cutting
A waterjet follows the contours in your DXF. Start from closed, smooth paths and each shape pierces once and cuts in one pass, instead of stuttering through broken lines.
- Closed contours, one pierce per shape
- Smooth curves with fewer nodes
- DXF in millimeters and SVG in the same download
Works with WAZER WAM, OMAX, Flow and other waterjet CAM software.
How to prepare a waterjet file
- 1
Upload the image
Drop the logo, drawing or photo. Bold shapes cut best in thick material. The free preview shows each contour before you pay.
- 2
Pick Profile Cut
Profile Cut keeps simple shapes and fewer nodes, which means fewer pierces and a smoother cut.
- 3
Download DXF or SVG
DXF goes into OMAX, Flow and most waterjet CAM. WAZER WAM takes DXF or SVG.
- 4
Set it up in the CAM
Import the file, confirm inches or millimeters, pick the material, thickness and edge quality, and let the software add the lead-ins and the kerf offset.
Waterjet details that change the cut
Units
Many waterjet programs ask for the unit when they open a DXF. The DXF from this page is in millimeters: confirm it so the part is not 25.4 times off.
Kerf
Draw the part at its true size. The waterjet software offsets the path by the kerf, around 1.2 mm (0.044 in) on a desktop WAZER.
Plain SVG for WAZER
WAZER's import checklist asks for Plain SVG. If WAM refuses an SVG, save it as Plain SVG in Inkscape or use the DXF.
Pierces
Every closed shape starts with a pierce. Fewer, cleaner shapes save time and abrasive.
Common waterjet file problems
The CAM shows hundreds of tiny segments
The file came from a pixel trace. The Profile Cut preset draws smooth curves with fewer nodes.
Islands drop out of the part
The inside of a letter or a ring is a separate piece. Add bridges, or let it fall out on purpose.
The part is off by 25.4 times
The DXF was read in inches instead of millimeters. Open it again and confirm the unit.
WAM will not open the SVG
Save it as Plain SVG, or import the DXF instead.
For job shops with a waterjet
Clean contours for abrasive waterjet jobs
Customer art arrives as a photo or a JPG logo. Convert it into closed contours here, or send the job for a quote when it needs more work before it reaches the table.
Free preview of the contours, no signup. A quote takes one business day.
Where each file goes
- DXF OMAX, Flow and WAZER WAM, in millimeters
- SVG WAZER WAM, saved as Plain SVG
Custom · On quote
Top-of-market quality for complex jobs: large-format murals, detailed illustrations, photo to vector, multi-layer print files. Finished by hand by our team and checked before delivery.
Working from a logo or a photo with no machine in mind? Use the VectoSolve vectorizer; for a vinyl or paper cut, the PNG to SVG cut file converter.
DXF for waterjet FAQ
What file does a waterjet use?
Most waterjets take a DXF into their own CAM software, which writes the machine program. WAZER WAM takes DXF or SVG and writes G-code to an SD card.
Do I need to add the kerf to my drawing?
No. Draw the part at its true size; the waterjet software offsets the path by the kerf and adds the lead-ins.
Can I waterjet a logo made from a photo?
Yes, if the shapes are bold. Very thin details are limited by the jet width, so the Profile Cut preset keeps shapes that cut cleanly.
DXF or SVG for WAZER?
Both work in WAM. The DXF is the safer choice when the same file also goes to other machines.
Is this a library of waterjet DXF files?
No. You make the DXF from your own logo or image. The free preview shows the result; downloading the clean DXF is part of a paid plan.
More machine guides: all VectoSolve tools