SVG Files for Shaper Origin
Origin cuts what the SVG tells it to: closed shapes for exterior, interior and pocket cuts, open lines for engraving. Start from a clean, closed trace of the logo instead of a pixel outline.
- Closed shapes Origin can cut inside or outside
- Smooth curves the bit can follow
- A DXF in the same download for VCarve or Fusion 360
Works with Shaper Origin and Shaper Hub, plus VCarve, Fusion 360 and Carbide Create for the DXF.
How to prepare an SVG for Shaper Origin
- 1
Upload the logo or drawing
Drop a PNG or JPG. Bold logos, lettering and silhouettes route best. The free preview shows each shape before you pay.
- 2
Pick Profile Cut
Profile Cut keeps simple shapes with fewer nodes; Balanced keeps more detail for pockets and inlays.
- 3
Set the cut type colors
Open the SVG in Inkscape or Illustrator and color each shape with Shaper's code: black fill for an exterior cut, white fill with a black stroke for an interior cut, gray fill for a pocket, gray stroke for an on-line cut.
- 4
Load it on Origin
Save as SVG, move it to Origin with a USB drive or Shaper Hub, place it on the work surface and cut.
What Origin reads in an SVG
Closed shapes for inside and outside
Origin needs a closed shape to tell the inside from the outside. Open lines can only be on-line cuts or guides.
Stroke width does not matter
A hairline and a thick stroke give the same cut. The bit and the offset you choose on the tool set the width.
True grays only
Shaper's guide asks for grays with equal red, green and blue values at full opacity. A tinted gray may not read as a pocket.
Inside corners follow the bit
A router bit leaves a radius in every inside corner, half the bit diameter: 1/16 in with a 1/8 in bit. Keep thin details wider than the bit.
Common Origin file problems
Origin only offers an on-line or guide cut
The shape is open. Use the closed trace from this page, or join the gap in your editor.
Shapes read as the wrong cut type
The colors do not match Shaper's code. Recolor the fill and stroke as listed in the steps above, then save the SVG again.
Small letters break or vanish
Details narrower than the bit cannot be cut. Scale the design up, or route the letters with a smaller bit.
The pocket comes out a little narrow
Shaper's guide notes that a pocket keeps a small border offset. Follow it with an interior cut on the same shape when the final width must be exact.
For sign makers and furniture shops
Logos ready for the router, not just the screen
A customer logo traced into closed, smooth shapes routes cleanly on a handheld CNC. Convert it here, or send a batch of sign jobs for a quote.
Free preview of every closed shape, no signup. The quote gives the price before any work starts.
Where each file goes
- SVG Origin and Shaper Hub, once the cut colors are set
- DXF VCarve, Fusion 360 or Carbide Create, AutoCAD 2000 or R12
- PNG a quick preview to send the customer for approval
Custom · On quote
Top-of-market quality for complex jobs: large-format murals, detailed illustrations, photo to vector, multi-layer print files. Finished by hand by our team and checked before delivery.
Artwork for a screen, a print or a vinyl cutter starts the same way: the image to SVG converter for any picture, the PNG to SVG converter when the shapes will be cut.
SVG for Shaper Origin FAQ
What file format does Shaper Origin use?
SVG. Origin reads color-coded vector shapes saved as SVG, and the colors tell it the cut type: exterior, interior, on-line, pocket or guide.
What are the Shaper Origin SVG color codes?
Exterior: black fill with a black stroke. Interior: white fill with a black stroke. On-line: a gray stroke with no fill. Pocket: a gray fill. Guide: blue. Shaper's Cut Type Encoding page is the reference.
Can I turn a photo into a Shaper Origin file?
Yes, when the photo has bold shapes: a silhouette, a logo or lettering. Fine photo detail cannot be routed, so the Profile Cut preset keeps the shapes a bit can cut.
Do I need Illustrator to set the cut colors?
No. Inkscape sets fill and stroke colors too, and Shaper publishes a guide for making grays that Origin reads.
Does the Shaper download include a DXF?
Yes. The CNC download has SVG, DXF and PNG. Origin uses the SVG; the DXF is for VCarve, Fusion 360 or Carbide Create.
More machine guides: all VectoSolve tools