Skip to content
For monument, sign and glass shops

Sandblast Stencil Files From Any Logo or Lettering

A sandblast stencil is cut from adhesive resist, so the center of an O stays where it is: no bridges, unlike a spray paint stencil. What it needs is clean, closed shapes. Turn the artwork into a cut file here and send it to your stencil cutter.

Secure checkout by StripeCancel anytime from your account
  • Closed shapes that weed cleanly
  • No bridges: the resist stays stuck down
  • SVG and DXF for the software that drives your cutter

For vinyl cutters and stencil plotters driven by sign software such as FlexiSign, SignMaster or VinylMaster.

From artwork to a sandblast stencil

  1. 1

    Upload the artwork

    Drop the logo, emblem or lettering: a scan, a JPG or a photo of an existing stone. The free preview shows each shape before you pay.

  2. 2

    Choose the stencil preset

    Clean Cut for lettering and bold emblems, Balanced for most logos, High Detail only when the resist and the blast can hold fine lines.

  3. 3

    Size it and download

    Type the final width in the DXF panel, or scale the SVG in your cutting software, so the stencil matches the stone or the panel.

  4. 4

    Cut, weed and blast

    Cut the resist on your plotter, weed the areas to blast, apply the stencil and blast. The rest of the resist protects the surface.

Stencil details that change the blast

Thin mask or thick resist

A thin vinyl mask is enough to frost glass. Deep carving in stone needs a thick rubber resist that holds up to the blast.

Blade for thick resist

Thick resist usually cuts with a 60 degree blade, at slow speed and high force. Run a test cut on a scrap before the real stencil.

Detail the resist can hold

Very small text and hairlines are hard to cut and weed in thick resist. Keep strokes bold, or use photoresist for fine detail.

Mirror for the back of glass

When you blast the back of clear glass to read it from the front, mirror the design before you cut the stencil.

Common stencil problems

Weeding takes longer than the blast

A pixel trace leaves specks and jagged edges. The converter drops the specks and draws smooth shapes, so there is less to weed.

Small letters tear when you weed

The strokes are too thin for the resist. Scale the stencil up, choose a bolder letter, or switch to photoresist for that job.

The stencil lifts during the blast

A thin mask gives way on a deep blast. Match the resist to the depth, and press it down well before you start.

The family only has a photo of the old stone

Convert the photo here, then compare the traced lettering with the stone and clean it up before you cut.

For memorial and sandblasted sign shops

Emblems and lettering ready to cut in resist

Memorial emblems, carved signs and etched glass start from a customer photo or an old drawing. Convert it here, or send the job for a quote and get clean cut files for the stencil cutter.

Free preview of each shape, no signup. Photos of old stones are welcome.

Photo of an old moose crossing road sign bolted to a post
The moose crossing sign as a clean SVG
A worn road sign photo, redrawn as 32 clean shapesJPG photo, 1337 x 1002 px, 641 KBSVG, 23 KB, 32 paths

What each file is for

  • SVGSVG the cutting software that drives your plotter
  • DXFDXF monument CAD, or a router for carved signs
  • PNGPNG a proof for the family or the customer

Product photos are mockups: each design is the real VectoSolve file, not retouched. Source photos are public domain or CC0. Photo: JPark99, Wikimedia Commons, public domain.

Studio quality

Custom · On quote

Top-of-market quality for complex jobs: large-format murals, detailed illustrations, photo to vector, multi-layer print files. Finished by hand by our team and checked before delivery.

Working from a logo or a photo with no machine in mind? Use the VectoSolve vectorizer; for a vinyl or paper cut, the PNG to SVG tool.

Done for you, from $9 per file

Memorial orders every week?

Send the emblem or the photo of the stone; we return clean stencil files, checked before delivery.

  • Simple One colour, bold shapes: a silhouette, a monogram, a simple logo$9 per file
  • Standard A logo or lettering up to 3 colours, a sign layout$15 per file
  • Complex Fine detail, small text, many colours, a photo or a sketch$25 per file
  • Production CNC or plasma profiles with G-code, multi-layer and multi-part jobs$45 per file

Rush: next business day, +$5 per file. Quote within one business day; the delivery date is on the quote.

Shop plans, for files every week

  • Shop 1010 files a month$99 a month
  • Shop 2525 files a month$199 a month
  • Shop 5050 files a month$349 a month

Any file up to Complex counts as one, a Production file counts as two. Unused files do not roll over.

  • You pay after you have seen the watermarked preview
  • Files checked before delivery, in the format your machine reads

More on our logo vectorization service.

Sandblast stencil files FAQ

What file do I need for a sandblast stencil?

A vector cut file: SVG or DXF for the software that drives your stencil cutter. A JPG or PNG has to be traced into closed shapes first.

Do sandblast stencils need bridges?

No. The resist is adhesive, so islands like the middle of an O stay on the surface. Bridges are for loose spray paint stencils.

Can I make a stencil from a photo of a headstone?

Yes, when the lettering is sharp in the photo. Trace it here, check the letters against the stone and clean them up before you cut.

Vinyl or rubber resist?

Thin vinyl mask for frosting glass, thick rubber resist for carving stone. The cut file is the same; only the blade, force and speed change.

Can I make photoresist from this file?

Photoresist is not cut: it is exposed through a film positive printed from the artwork. The SVG from this page can be printed as that film.

More machine guides: all VectoSolve tools