How to Make Stickers
The sheet maker is free: no signup, no watermark, no limit, and your image is never uploaded.
Turn a drawing or a logo into a sheet of stickers. The sheet maker lays your design out on a Cricut Print Then Cut, US Letter or A4 sheet, draws a cut line around every sticker and gives you the files to print and cut.
- One design repeated across the whole sheet
- A cut line around every sticker, offset in millimeters
- A Print and Cut SVG, a 300 DPI PNG to print, and the cut lines alone
- No signup, and your image never leaves your browser
Print on a home printer that takes sticker paper, then cut with a Cricut, a Silhouette, another cutting machine or scissors.
What you need to make stickers
A transparent PNG
Your drawing, logo or photo, saved as a PNG with a transparent background.
Sticker paper
Printable sticker paper, matte or glossy, or printable vinyl. Buy the kind made for your printer, inkjet or laser.
A printer
A home printer that takes sticker paper. Print at actual size so each sticker keeps the width you set.
A cutter or scissors
A Cricut, a Silhouette or another cutting machine follows the line for you. Scissors or a craft knife work too.
No transparent PNG yet? The transparent background maker clears the background of a photo or a logo. It shows one free preview a day, with no signup and no watermark, and the PNG download comes with a plan: Starter is $7.99 a month for 25 conversions, which covers 71 background removals a month.
How to make stickers, step by step
- 1
Get a transparent PNG
Export your design as a PNG with a transparent background. A photo or a JPG still has its background: clear it with a background remover first.
- 2
Build the sticker sheet
Drop the PNG into the sheet maker at the top of this page. Pick the sheet, the width of one sticker and the cut offset, then press Build the sheet. The preview shows every sticker with its cut line.
- 3
Print on sticker paper
Download the files and print the sheet at actual size on printable sticker paper or printable vinyl.
- 4
Cut out the stickers
A cutting machine follows the cut line around each sticker. Cut through the sticker layer only to keep a sheet that peels, or through the backing too so each sticker comes out on its own. No machine? Cut along the line with scissors.
Kiss-cut, die-cut or vinyl: which stickers to make
Kiss-cut sticker sheets
The blade cuts the sticker layer and leaves the backing whole, so every sticker peels off one sheet. A good fit for planners, labels and gift sets.
Die-cut stickers
The cut goes through the backing too, so each sticker comes out on its own, in the shape of the design. The cut line is the same; the depth is a setting on the machine.
Vinyl decals
One color of vinyl, cut without printing, for cars, mugs and windows. A cutter needs vector outlines for that, not pixels.
Sharper stickers start from a sharp file
The sheet keeps the pixels of your PNG, and the 300 DPI print needs about 300 pixels for every inch of sticker: 600 pixels across for a 2 inch sticker. A small or blurry image prints soft.
A logo or a drawing can go through the PNG to SVG converter instead: the SVG stays sharp at any size and gives a cutter the outlines it needs for vinyl decals, for example an SVG for Cricut.
The PNG to SVG converter shows one free preview a day, with a watermark. The clean SVG is $6.99 for that one file, or 25 files for $7.99 a month with the Starter plan.
Sticker sheet tips
The tool says there is no transparent background
The cut line follows the transparent edge of the PNG. A JPG, or a PNG that fills its whole canvas, has no edge to follow: remove the background first, then drop the new PNG.
The border around the design is too thin or too wide
Change the cut offset and build the sheet again. A larger offset leaves a wider border and joins parts of the design that sit close together into one sticker.
Holes inside the design are not cut out
Each sticker is cut on its outer contour only, so a hole inside the design stays on the sticker. That is how die-cut stickers are made.
Nothing fits on the sheet
The sticker plus its cut offset is wider than the sheet. Lower the sticker width.
Making stickers: FAQ
How do you make stickers at home?
You need a design saved as a PNG with a transparent background, sticker paper, a printer, and a cutting machine or scissors. Drop the PNG into the sheet maker on this page, build a sheet with a cut line around each sticker, print it at actual size, then cut along the lines.
Is the sticker sheet maker free?
Yes. The sheet maker is free: no signup, no watermark, no limit, and it runs in your browser, so your image is never uploaded. The three downloads come straight from your browser.
Which file do I print and which do I cut?
The Print and Cut SVG holds the stickers and their magenta cut lines in one file, at the real size of the sheet. The 300 DPI PNG holds the stickers alone, ready to print. The cut lines SVG holds the outlines alone, for when you print and cut in two steps.
How do I make stickers with a Cricut?
Pick the Cricut Print Then Cut sheet in the sheet maker: it keeps the whole sheet inside the 6.75 x 9.25 inch area that Print Then Cut uses on US Letter paper. Print Then Cut prints the sheet with registration marks on your sticker paper, then the machine reads the marks and cuts around the stickers.
Can I make stickers from a photo?
Yes, once the background is gone. The transparent background maker clears the background of a photo or a logo. It shows one free preview a day, with no signup and no watermark, and the PNG download comes with a plan: Starter is $7.99 a month for 25 conversions, which covers 71 background removals a month. Then drop that PNG into the sheet maker.
Kiss cut or die cut?
Both use the same cut line. A kiss cut goes through the sticker layer and leaves the backing whole, so the stickers peel off one sheet. A die cut goes through the backing too, so each sticker comes out on its own. The depth is a setting on the machine, not in the file.
Sticker paper or printable vinyl?
Printable sticker paper is the simplest choice for planners, labels and gifts. Printable vinyl lasts longer on bottles and laptops, especially under a clear laminate sheet. Either way, buy the kind made for your printer, inkjet or laser.
Can I make vinyl decals without a printer?
Yes. A single-color decal is cut from colored vinyl, with no printing, but the cutter needs vector outlines instead of pixels, so convert the design to SVG first. The PNG to SVG converter shows one free preview a day, with a watermark. The clean SVG is $6.99 for that one file, or 25 files for $7.99 a month with the Starter plan.
More sticker tools: the sticker cut line generator for a single sticker, the sticker maker, Print Then Cut files for Cricut and all VectoSolve tools.