Skip to content
For laser owners who make stamps

Rubber Stamp Maker: Logo to Laser Stamp File

A good stamp starts with solid, crisp shapes. Trace the logo or signature into a clean vector, mirror it, and engrave the background away on laser rubber, leaving the design raised.

  • Solid shapes with crisp edges
  • An SVG to mirror and frame in LightBurn
  • For logos, signatures and return address stamps

Works with LightBurn, RDWorks and CO2 lasers, on laser rubber.

Secure checkout by StripeCancel anytime from your account

How to make a rubber stamp with a laser

  1. 1

    Upload the logo or signature

    Scan a signature in black ink on white paper, or drop the logo file. The free preview shows the traced shapes before you pay.

  2. 2

    Pick the preset

    High Detail keeps pen strokes and small text; Balanced suits most logos.

  3. 3

    Mirror and frame it

    In LightBurn, mirror the design horizontally, draw a frame around it, and put the frame and the design on the same Fill layer: the laser removes the background and leaves the design raised.

  4. 4

    Engrave the rubber

    Engrave on laser rubber with good ventilation, add a ramp for a sloped shoulder, then clean off the dust and mount the stamp on its block.

Settings that make a stamp print well

Mirror before you engrave

A stamp prints reversed, so the engraved design must be a mirror image. Mirror it in the layout, not only in the preview.

Engrave the background

For vector art, a frame around the design on a Fill layer removes everything outside the shapes. For a bitmap, LightBurn has a Negative Image option.

Ramp for a strong shoulder

LightBurn's Ramp Length slopes the sides of the engraving, so thin lines keep their support and do not fold under pressure.

Laser rubber and a CO2 laser

Laser rubber engraves cleaner, with less smell, than craft rubber. Most stamp makers use a CO2 laser, and any rubber needs strong ventilation.

Smallest details

Text around 7 point and smaller is hard to engrave cleanly. Keep strokes thick enough to stand on their own.

Common stamp problems

The stamp prints backwards

The design was not mirrored before engraving. Mirror it horizontally in the layout and engrave again.

The design burned away instead of the background

The fill is inverted. Put a frame around the design on the same Fill layer, so the area between them is removed.

Thin lines fold or break

Add a ramp for a sloped shoulder, and thicken the thinnest strokes before tracing.

The print has fuzzy edges

The source was a small or blurry image. A clean trace gives crisp edges at stamp size.

For stamp and engraving shops

Stamp artwork that engraves crisp in rubber

Logos and signatures sent by customers are rarely stamp-ready. Convert them into solid vectors here, or send a batch of stamp orders for a quote.

Free preview of the stamp artwork, no signup. Several stamps fit in one quote.

What each file is for

  • SVGSVG LightBurn, to mirror and frame on a Fill layer
  • DXFDXF RDWorks and other CO2 laser software
  • PNGPNG Negative Image engraving as a bitmap
Studio quality

Custom · On quote

Top-of-market quality for complex jobs: large-format murals, detailed illustrations, photo to vector, multi-layer print files. Finished by hand by our team and checked before delivery.

Working from a logo or a photo with no machine in mind? Use the VectoSolve vectorizer; for a vinyl or paper cut, the PNG to SVG converter.

Rubber stamp maker FAQ

How do I make a rubber stamp from my logo?

Trace the logo into a clean vector, mirror it, frame it on a Fill layer and engrave laser rubber, so the background is removed and the design stays raised. The steps above show each part.

Do I need to mirror the image for a stamp?

Yes. A stamp prints the reverse of what is engraved, so the design must be mirrored horizontally before the laser runs.

Can a diode laser engrave a rubber stamp?

Some laser rubbers engrave on a diode, slowly. CO2 lasers handle rubber better, which is why most stamp makers use one.

Can I make a signature stamp?

Yes. Sign in black ink on white paper, scan or photograph it flat, and use the High Detail preset so the pen strokes stay intact.

What file does LightBurn need for a stamp?

The SVG. LightBurn mirrors it, and a frame on the same Fill layer turns it into a negative. The PNG works too, with the Negative Image option.

More machine guides: all VectoSolve tools