Skip to content
For award, trophy and engraving shops

Engraving-Ready SVG Files for EngraveLab

A Fill tool path removes material from inside a shape, so every letter and logo part has to be a closed shape. Turn the customer logo into those shapes here, import the SVG into EngraveLab and choose your tool paths.

Secure checkout by StripeCancel anytime from your account
  • Closed shapes that fill without gaps
  • Colors kept apart, ready for laser job colors
  • SVG, DXF and a PNG proof in one ZIP

Works with EngraveLab on rotary engravers and lasers, including the EngraveLab Laser L Edition.

From a customer logo to an engraved plate

  1. 1

    Upload the logo

    Drop the PNG or JPG for the plaque, trophy or name badge. The free preview shows each shape before you pay.

  2. 2

    Pick the engraving preset

    Clean Cut for bold logos and lettering, High Detail for fine lines on large plates, CAD Reference for the fewest nodes.

  3. 3

    Download the SVG

    The ZIP holds the SVG, a DXF at the width you set, and a PNG proof for the customer.

  4. 4

    Import it and add tool paths

    In EngraveLab, use File, Import and pick the SVG, size it on the plate, then add a Fill or an outline tool path, or set its color mode on a laser.

EngraveLab tool paths that need clean shapes

Fill

A Fill tool path is a series of cuts that removes material inside a shape. An open or crossing outline leaves it no clear inside.

Online, Male and Female

Online follows the edge with no offset. Male cuts outside the shape and Female inside, each offset by half the bit width.

Fine tool after the fill

A finer tool can clear the rough or leftover material of the first fill pass. Small counters and tight corners need it most.

Job colors on a laser

On EngraveLab Laser, each fill color gets a mode, cut, hole, engrave, grade engrave or 3D, with its own speed, power and passes.

Why an engraving job comes out wrong

The fill skips part of a letter

The outline has a gap or crosses itself, so the tool path cannot tell inside from outside. Import the closed shapes from this page instead.

The logo engraves as a blurry raster

An image placed in the job engraves as a raster. Import the SVG so the logo is made of vector shapes you can fill or cut.

Small text fills in on the plate

Strokes thinner than the bit or the laser spot close up. Engrave larger, pick a finer tool, or keep High Detail for plates big enough to hold it.

The vectorizer drops thin lines

The source logo is too small or soft for tracing. The converter here redraws smooth curves first, so thin parts come back as shapes.

For award and trophy shops

Plates, plaques and badges from the logo the customer sends

Award orders come with a logo copied from an email signature or a scanned letterhead. Convert it here, or send the batch for a quote and get closed shapes ready for EngraveLab fill and outline tool paths.

Free preview of each shape, no signup. Logos from letterheads and emails are fine.

Photo of a stag weathervane on a tower
The stag weathervane as an SVG of closed paths
A stag weathervane photo, engraved from 9 closed pathsJPG photo, 1000 x 934 pxSVG, 14 KB, 9 closed paths

Where each file goes

  • SVGSVG EngraveLab import, shapes and colors kept
  • DXFDXF CAD drawings and other engraving software
  • PNGPNG a proof for the customer before you engrave

Product photos are mockups: each design is the real VectoSolve file, not retouched. Source photos are public domain or CC0. Photo: Renardo la vulpo, Wikimedia Commons, CC0.

Studio quality

Custom · On quote

Top-of-market quality for complex jobs: large-format murals, detailed illustrations, photo to vector, multi-layer print files. Finished by hand by our team and checked before delivery.

No machine at the end of the job? The VectoSolve vectorizer turns any picture into an SVG, and the PNG to SVG tool keeps the paths ready to cut.

Done for you, from $9 per file

Award orders stacking up?

Send the customer logos and we return closed shapes for your engraving tool paths, checked before delivery.

  • Simple One colour, bold shapes: a silhouette, a monogram, a simple logo$9 per file
  • Standard A logo or lettering up to 3 colours, a sign layout$15 per file
  • Complex Fine detail, small text, many colours, a photo or a sketch$25 per file
  • Production CNC or plasma profiles with G-code, multi-layer and multi-part jobs$45 per file

Rush: next business day, +$5 per file. Quote within one business day; the delivery date is on the quote.

Shop plans, for files every week

  • Shop 1010 files a month$99 a month
  • Shop 2525 files a month$199 a month
  • Shop 5050 files a month$349 a month

Any file up to Complex counts as one, a Production file counts as two. Unused files do not roll over.

  • You pay after you have seen the watermarked preview
  • Files checked before delivery, in the format your machine reads

More on our laser engraving file service.

SVG for EngraveLab FAQ

Can EngraveLab import SVG files?

Yes. Use File, Import and pick the SVG; the Files of type list shows every format your version imports.

How do you vectorize a logo in EngraveLab?

Select the image, run Image, Prepare to Vectorize Wizard, then click Vectorization on the Accuscan SmartBar. The wizard posterizes the colors before tracing.

Why does the EngraveLab vectorizer miss details?

It traces the pixels of the image, so a small or compressed logo loses thin lines. A clean trace from this page imports as finished shapes.

Which tool path suits a logo on a plate?

Fill for solid areas, with a fine tool for the corners, and Online, Male or Female for outlines. All of them need closed shapes.

Is the EngraveLab file in the free preview?

The free preview shows the traced shapes. Downloading the SVG, DXF and PNG is part of a paid plan.

More machine guides: all VectoSolve tools