Skip to content
For diode lasers running on GRBL

Clean SVG Files for LaserGRBL

LaserGRBL follows an SVG exactly as it is written. Give it smooth, closed outlines at the right size for cutting and scoring, and open the PNG when you want a filled engrave.

  • Smooth outlines instead of pixel steps
  • A PNG in the same download for filled engraving
  • Works with any GRBL laser that LaserGRBL controls

Works with LaserGRBL on Windows and GRBL lasers such as Ortur, Atomstack, Sculpfun and Two Trees.

Secure checkout by StripeCancel anytime from your account

From an image to a LaserGRBL job

  1. 1

    Upload the image

    Drop a logo, a line drawing or a photo. The free preview shows the traced outlines before you pay.

  2. 2

    Choose the preset

    Clean Cut for shapes you will cut or score, High Detail for line art you will engrave.

  3. 3

    Download SVG and PNG

    The download holds the SVG for vector jobs and a PNG of the same design for filled engraving.

  4. 4

    Open it in LaserGRBL

    Use File, Open File. Pick the SVG to follow the outlines, or the PNG to fill: choose Line To Line Tracing, type the size in millimeters, then set speed and power for your material.

LaserGRBL settings that matter

SVG is read as written

LaserGRBL turns each SVG path into G-code moves. Older releases trace the outlines only and ignore the fill, so check your version before you expect a solid engrave.

Size in millimeters

An SVG comes in at the size stored in the file. If it is wrong, set the document units to millimeters in your vector editor and save again, or open the PNG, where LaserGRBL asks for the size.

Filled engraving from the PNG

Line To Line Tracing engraves solid areas row by row; 1bit BW Dithering suits photos. The quality value sets the number of lines per millimeter.

Test before the real piece

Diode power and speed change from one wood or leather to the next. Burn a small test grid first, then run the job.

Common LaserGRBL problems

Only the outline engraves

The SVG fill is not used. Open the PNG with Line To Line Tracing for a solid engrave, or add a hatch fill to the SVG in your editor.

Vectorize gives jagged edges

LaserGRBL vectorizes the pixels it is given. Trace the picture here first: the curves come out smooth, and LaserGRBL only has to follow them.

The job is tiny or huge

The SVG does not carry the size you want. Set millimeters in the editor, or use the PNG and type the width in the import dialog.

Cutting takes forever

Too many tiny segments slow a diode laser down. The Clean Cut preset keeps fewer nodes on simple shapes.

For makers selling engraved gifts

Customer photos ready for any GRBL laser

Engraved gifts start from phone photos and screenshots. Convert each one here, or send a batch for a quote and get the files checked before delivery.

Free preview of the outlines, no signup. Send the batch when a whole order needs files.

What LaserGRBL does with each file

  • SVGSVG vector import, the laser follows each line
  • PNGPNG Line To Line Tracing or dithering for a filled engrave
  • G-codG-code opens directly; the Photo Engraving tool writes it from a photo
Studio quality

Custom · On quote

Top-of-market quality for complex jobs: large-format murals, detailed illustrations, photo to vector, multi-layer print files. Finished by hand by our team and checked before delivery.

Working from a logo or a photo with no machine in mind? Use the online vectorizer; for a vinyl or paper cut, the PNG to SVG tool.

SVG for LaserGRBL FAQ

Does LaserGRBL open SVG files?

Yes. LaserGRBL opens SVG as vector paths and turns them into G-code that follows each line. PNG, JPG and BMP open in its image dialog, and G-code files open directly.

Why does LaserGRBL only engrave the outline of my SVG?

Many LaserGRBL versions trace SVG paths as lines and leave the inside empty. Open the PNG with Line To Line Tracing for a solid engrave, or add a hatch fill to the SVG before you import it.

Which file should I use to cut plywood?

The SVG: the laser follows the outline. Thicker sheets need several passes on a diode laser; take the pass count from your laser maker or from a test cut.

Does it work with my Ortur, Atomstack, Sculpfun or Two Trees laser?

If LaserGRBL drives the laser, yes. The SVG and PNG do not depend on the brand; only speed and power change.

Can I get G-code straight from a photo?

Yes. The Photo Engraving tool writes GRBL G-code from a photo, with dithering, ready to open in LaserGRBL.

More machine guides: all VectoSolve tools